Search

Rugged Pan & Tilt Positioners

Contact us for lowest price (800) 284-2288 , (858) 565-1101 Call Now [email protected]

The QPT-500 Pan & Tilt positioners are designed for a wide variety of applications. They are rugged and durable enough for virtually any environment. The QPT-500 can handle payloads up to 500 lb-ft of torque, respectively, making each suitable for a wide range of sensors. Multiple models are available to fit your needs. Integrated Control (IC) units can communicate via networked PC or separate controller. Analog units are inexpensive solutions where simple command and control are required without a PC. The Sentry line takes our products to the next level by integrating Stepper Motors into the design for higher accuracy and speed control.

→ Payloads up to 500 ft-lbs (678 Nm)
→ Analog driven or Digital Serial Integrated Controller (IC) models
→ Fixed, Inverted or Mobile Installations
→ Mil-Spec Connectors
→ Tough metal housing and gearing for durability in harsh environments
→ Marine configuration that meets IP-67 standards

Load Capacity:  QTP-500 – 500 lb-ft (679 Nm) maximum

Operating Voltage Range: QTP-500 – 48VDC (±4VDC)

Pan-Axis Range: 350° (±175°) (non-slip ring)

Pan-Axis Speed: 0.005° - 8.0°/sec

Tilt-Axis Range: 180° (±90°)

Tilt-Axis Speed: 0.005° – 3.5°

Internal Heater: Thermostatically controlled 0°C (32°F) ON • 1.7°C (35°F) OFF

Operating Temperature: Without Heater: -15°C to 55°C (5°F to 131°F) • With Heater: -30°C to 55°C (-22°F to 131°F)

Rotational Limits: Fixed tilt hard limit, adjustable soft limits on both axes

Feedback: Optical Encoders (0.01° readout)

Repeatability: 0.25° (Pan - 0.05°, Tilt - 0.1° on Sentry models)

Duty Cycle: 20%

Motor Type / Drive: Stepper (Sentry) and DC Brush

Communication to Pan & Tilt: RS232 / 422 / 485, IP Ethernet: 10 / 100 Base-T

Communication to Sensors: RS232 / 422

Control Protocol: Moog QuickSet or Pelco D

Connector Specifications: Mil-Spec grade used on all configurations

Materials: Housing 6061-T6 Aluminum, stainless steel hardware, permanently sealed radial ball bearings

Finish / Color: White powder coat paint over alodined chromate for corrosion resistance standard. Other colors and CARC available upon request

Weight: 117 lbs (80.45 kg) to 122 lbs (55.45 kg) depending on modelon model

Test Cable and Software: 6 ft test cable and software included with all IC and Sentry configurations



facebook.png twitter.png googleplus.png linkedin.png youtube.png
Prices and specifications subject to change without notice.