Search
By: JAI
http://www.avsupply.com/images/logos/jai-logo.jpg
CCD & CMOS Cameras
Contact us for lowest price (800) 284-2288, (858) 565-1101, sales@avsupply.com, or fax (858) 300-4193
2/3" Bayer Mosaic Color Progressive Scan Camera

The JAI CV-M7 CL is a 1.4 megapixel progressive scan color camera suitable for a wide range of machine vision applications.

The CV M7 CL features several special functions ideal for Intelligent Traffic Systems (ITS) applications. The camera outputs 24 full frames/second. Higher frame rates are possible by using partial scan.

Based on 10-bit A/D technology, theCVM7 CL utilizes proprietary sample and hold and correlated double sampling (CDS) techniques to achieve double-speed readout without trade-offs in dynamic range or image fidelity. The CV-M7 CL uses a 2/3" format Bayer mosaic progressive scan CCD sensor, in conjunction with a monolithic IR-cut/optical low pass filter, for superior color rendition.
 

→ Digital 2/3" color progressive scan CCD camera
→ RGB primary color mosaic filter (Bayer) for host based RGB decoding
→ 1392 (h) x 1040 (v) 6.45 μm square pixels
→ Extended sensitivity compared with CV-M7
→ Host based color interpolation
→ 8 bit video output as LVDS (EIA 644) using 10 bit internal processing
→ Camera Link version with 10 bit video output
→ Full 1380 (h) x 1030 (v) frame readout in 1/24 second
→ Partial scan to 1/2, 1/4 and 1/8 for higher frame rate
→ Edge pre-select and pulse width external trigger modes
→ Frame-delay and smearless readout modes
→ Multiple exposure with up to 6 exposures within a single frame
→ Shutter speeds from 1/24 to 1/10,000 second in 10 steps
→ Trigger and timing signals as LVDS or via Camera Link
→ Setup by switches or serial control (short ASCII commands)
→ Windows 98/NT/2000 setup software

Scanning system Progressive 1060 lines 24 frames/sec.
Pixel clock 40.49 MHz
Line frequency 25.43 kHz (1592 pixel clock/line)
Frame rate for full frame 24 frames/sec. (1060 lines/frame)
CCD sensor 2/3" progressive scan IT CCD with RGB primary color mosaic filter (Bayer)
Sensing area 8.9 (h) x 6.6 (v) mm
Cell size 6.45 (h) x 6.45 (v) mm
Effective pixels 1392 (h) x 1040 (v)
Pixels in video output, Full 1380 (h) x 1030 (v) 24 frames /sec.
Pixels in video output, 1/2 partial 1380 (h) x 512 (v) 44 frames/sec.
Pixels in video output, 1/4 partial 1380 (h) x 256 (v) 70 frames/sec.
Pixels in video output, 1/8 partial 1380 (h) x 128 (v) 102 frames/sec
Sensitivity on sensor 0.1 Lux (Max. gain, 50% video)
S/N ratio >57 dB
Video A/D conversion 10 bit
Video output digital (RGB in Bayer mosaic sequence for external RGB decoding) 8 bit LVDS (EIA 644); 10 bit in Camera Link
Video out (analogue for test) 0.7 Vpp, 75 Ω
Gamma 1.0
Gain Manual
Gain range -3 to 12 dB
Synchronization Int. X-tal. Ext. random trigger
Sync. output Composite 4 Vpp from 75 Ω
Trigger input TTL 4 V ± 2 V
EEN output 4 Vpp from 75 Ω
Pixel clock output LVDS or Camera Link
LEN/FEN output LVDS or Camera Link
Trigger input LVDS LVDS or Camera Link
Multiple exposure LVDS or Camera Link
Trigger modes Continuous, Edge pre-select, Pulse width control
Trigger in (Edge pre-select) >2 H
Shutter speed (fixed) 1/24 through 1/10,000 second
Pulse width control 2 H to 3 frames. (80 μsec. to 72 msec.)
Frame-delay readout Fixed shutter speeds. Delay = 3 frames
Smearless readout Edge pre-select, PWC and frame-delay
Multiple exposure interval =6 fixed exposures in frame-delay readout. Fixed shutter time 1H (80 μsec.)
Camera setup by switches on rear Shutter, Trigger, Scanning, Smearless, RS 232C control
Functions controlled by RS 232C Shutter, Trigger, Scanning, Readout, Trigger input, Select/polarity, LEN/FEN/EEN polarity, Set-up level and Gain
Operating temperature -5°C to 45°C
Humidity 20 - 80% non-condensing
Storage temp./humidity -25°C to 60°C/ 20% - 90%
Power 12V DC ± 10%. 3.3 W
Lens mount C-mount
Dimensions 40 x 50 x 90 mm (HxWxD)
Weight 250g

 



facebook.png twitter.png googleplus.png linkedin.png youtube.png pinterest.png
Prices and specifications subject to change without notice.