Search
By: JAI
http://www.avsupply.com/images/logos/jai-logo.jpg
CCD & CMOS Cameras
Contact us for lowest price (800) 284-2288, (858) 565-1101, sales@avsupply.com, or fax (858) 300-4193
Bayer Color Progressive Scan CCD 16-Megapixel Industrial Camera

The JAI AB-1600CL is one of the flagship cameras of the C3 Advanced series. It incorporates the Kodak KAI-16000 dual-tap sensor to deliver full 4872 x 3248 pixel resolution at 3 frames per second. The 16 megapixel industrial camera provides raw Bayer color output for host-based interpolation, and features a Camera Link interface offering user-selectable 8-bit, 10-bit, or 12-bit output.

Several pre-processing functions are built into the AB 1600CL camera to achieve high image quality while offloading these tasks from the user’s host PC. Available functions include a built-in blemish compensation function to correct for defective pixels, and automatic channel balancing.

Along with these high-end features, the 16-megapixel AB1600CLcamera receives the same extensive shock and vibration testing as lower resolution models to maximize its ability to withstand the rigors of industrial environments (70 G shock, 10 G vibration - 20Hz to 200 Hz XYZ). The camera also features a specialized internal heat sink and a ridged housing design which combine to produce exceptional thermal management and low noise image fidelity.

Core applications for the AB-1600CL include flat panel LCD inspection, solar panel inspection, PCB inspection, 3D metrology, biometrics, and microscopy, among others. The camera is also suitable for numerous high-end outdoor uses including surveillance, aerial imaging, and homeland security applications.
 

→ Member of C3 Advanced series
→ 4872 (h) x 3248 (v) 7.4 μm square pixels
→ 43.3 mm progressive scan IT CCD - Monochrome and Bayer mosaic color versions
→ 3 frames/second with full resolution in continuous operation
→ Increased frame rate with binning (AM-1600 CL) and partial scan
→ Pre-select and Pulse Width trigger modes
→ Electronic shutter with preset or programmable operation to 1/3378 seconds
→ LVAL-synchronous/-asynchronous operation (auto-detect)
→ Analog video output for auto-iris lens control
→ Camera Link interface with 12, 10 or 8-bit output
→ Setup by Windows NT/2000/XP via Serial Communications
→ Storage temp./humidity 25 °C to 60 °C / 20 to 90%

Several pre-processing functions for offloading host PC such as LUT for Gamma/Knee function; Pixel blemish compensation; Flat-field compensation (AM-1600CL only); Test pattern generator function
Sensor 43.3 mm progressive scan IT CCD
Pixel Clock 30.00 MHz
Frame rate full frame 2.99 frames/second (dual tap)
Active area 36.1 (h) x 24.0 (v) mm
Cell size 7.4 x 7.4 μm
Active pixels 4872 (h) x 3248 (v)
Color (AB-1600 CL) Raw Bayer output, host based interpolation
Read-out modes, Full 4872 (h) x 3248 (v) 3.05 fps
Read-out modes, 1/2 partial scan 4872 (h) x 1624 (v) 5.51 fps
Read-out modes, 1/4 partial scan 4872 (h) x 814 (v) 9.26 fps
Read-out modes, Binning 2x (H & V independently selectable)
Sensitivity (AB-1600 CL) 0.35 Lux (On sensor, max. gain, shutter off, 50% video)
S/N ratio >56 dB (0 dB gain)
Video output Camera Link, 8-bit, 10-bit or 12-bit
Gain Manual -3 to 12 dB
Gamma/Knee Fixed 0.45 or 256 point LUT
Synchronization Internal X-tal
Inputs, Camera Link Ext. trigger, LVDS (CC1)
Inputs, TTL Ext. trigger 4V -2V
Outputs, Camera Link Clk., FVAL, LVAL, Data, EEN
Outputs, TTL XEEN
Trigger modes Pre-select, Pulse Width
Accumulation Auto-detect LVAL-sync / async
Electronic shutter, Pre-set shutter 1/3 to 1/3200 in 10 steps
Electronic shutter, Programmable 295.98 micro s to 320.45 ms in increments of 98.66 micro s
Pre-processing functions Blemish compensation, Gain and channel balance, Flat field correction, Programmable LUT, Test pattern generator
Control interface Camera Link serial communication
Indicators on rear panel LED for power and trigger input
Operating temperature -5 °C to 45 °C
Humidity (operation) 20 - 90% non-condensing
Vibration 10 G (20Hz to 200 Hz XYZ)
Shock 70 G
Regulations CE (EN 61000-6-2, EN-61000-6-3), FCC part 15 class B, RoHS/WEEE
Power 12V DC /-10%. 7.8 W
Lens mount Universal P-mount, Nikon F-mount
Dimensions (H x W x L) 55 (h) x 55 (w) x 120 (d)
Weight 410 g

 



facebook.png twitter.png googleplus.png linkedin.png youtube.png pinterest.png
Prices and specifications subject to change without notice.