Search
By: JAI
http://www.avsupply.com/images/logos/jai-logo.jpg
CCD & CMOS Cameras
Contact us for lowest price (800) 284-2288, (858) 565-1101, sales@avsupply.com, or fax (858) 300-4193
Monochrome Progressive Scan CCD 16-Megapixel GigE Vision Camera

The JAI AM-1600GE is one of the flagship cameras of the C3 Advanced series. It incorporates the Kodak KAI-16000 dual-tap sensor to deliver full 4872 x 3248 pixel monochrome resolution at 3 frames per second. The 16 megapixel industrial camera features a GigE Vision interface offering user-selectable 8-bit, 10-bit, or 12-bit output.

A series of pre-processing functions are built into the AM 1600GE camera to achieve high image quality while offloading these tasks from the users host PC. Available functions include a look-up table (LUT), a built-in blemish compensation function, automatic channel balancing, and a flat-field compensation function using per-pixel gain and offset adjustments or image subtraction.

A unique feature of the AM1600GE is its sequence trigger mode, which allows the user to pre-select a combination of gain, offset and Region of Interest (ROI) that can be changed on-the-fly.

Along with these features, the 16-megapixel AM-1600GE camera receives the same extensive shock and vibration testing as lower resolution models to maximize its ability to withstand the rigors of industrial environments (70 G shock, 10 G vibration - 20Hz to 200 Hz XYZ). The camera also features a specialized internal heat sink and a ridged housing design which combine to produce exceptional thermal management and low noise image fidelity.

Core applications for the AM 1600GE include flat panel LCD inspection, solar panel inspection, PCB inspection, 3D metrology, biometrics, and microscopy, among others. The camera is also suitable for numerous high-end outdoor uses including surveillance, aerial imaging, and homeland security applications.

The AM-1600GE can be ordered with either P-mount or F-mount lens mounts. Custom lens mount designs are also possible for large quantity orders.

→ Member of C3 Advanced series
→ 4872 (h) x 3248 (v) 7.4 μm square pixels
→ 43.3 mm progressive scan IT CCD - Monochrome and Bayer mosaic color versions
→ 3 frames/second with full resolution in continuous operation
→ Increased frame rate with binning (AM-1600 GE) and partial scan
→ Edge-Pre-Select, Pulse Width and Frame Delay trigger modes
→ Sequence trigger mode for on-the-fly change of gain, exposure and ROI
→ Electronic shutter with programmable operation to 296 μs
→ Analog video output for auto-iris lens control
→ GigE Vision interface with 12, 10 or 8-bit output
→ Comprehensive software tools and SDK for Windows XP/Vista

Several pre-processing functions for offloading host PC such as LUT for Gamma/Knee function; Pixel blemish compensation (AM-1600GE only); Shading compensation (AM-1600GE only); Test pattern generator function
Sensor 43.3mm Monochrome KAI-16000-AXA
Pixel clock 30 MHz
Frame rate full frame 3.04 frames/sec. (dual tap)
Active area 36.1 mm (h) x 24.0 mm (v)
Cell size 7.4 μm x 7.4 μm
Active pixels 4872 (h) x 3248 (v)
Read-out modes, Full scan 4872 (h) x 3248 (v) 3.04 fps
Read-out modes, 1/2 partial scan 4872 (h) x 1372 (v) 5.51 fps
Read-out modes, 1/4 partial scan 4872 (h) x 1028 (v) 9.25 fps
Read-out modes, Variable partial scan Start line from 1 to 2448 by 1 line unit for AM-1600 GE, 2 line units for AB-1600 GE, height (lines) from 800 to 3248
Vertical binning mode 2x (5.63 fps)
Sensitivity 0.02 lux (Max. gain, Shutter: OFF, 50% video)
S/N ratio > 56 dB (0 dB gain)
Video output GigE Vision Compliant, 8-bit, 10-bit, 10-bit packed, 12-bit, 12-bit packed
Video output GigE Vision Compliant, Raw Bayer 8-bit, 10-bit or 12-bit
White balance n/a
Gain Manual/Automatic -3 to 12 dB
Gamma/Knee Fixed 1.0, 0.45 or 256 point LUT
Synchronization Internal X-tal
GPIO Module, Input/output switch Configurable 16-in / 12-out switch
GPIO Module, Clock generators (One) 12-bit counter based on Pixel clock
GPIO Module, Pulse generators (Two) 19-bit counter programmable for length, start point, stop point, repeat
Hardware trigger modes Edge Pre-Select, Pulse Width Control, Frame Delay and Sequence
Electronic Shutter, Programmable exposure 3 (296μs) to 3327 L (328ms) in 1L steps
Electronic Shutter, Exposure Time (Abs) μsec - user definable. Same range as PE
Electronic Shutter, Exposure auto continuous 100L to 3327L (1/101.35 sec to 1/3 sec)
Electronic Shutter, GPIO plus Pulse Width max. 2 sec (Can be set by 100μs unit or Pixel Clock unit)
Pre-processing functions Blemish compensation and shading compensation (AM-1600 GE only), Channel balance, programmable LUT, test pattern generator
Control interface Register based. GigE Vision / GenICam compliant
Functions controlled via GigE Vision interface Shutter, Gain, Black Level, Trigger mode, Read out mode, GPIO setup, ROI (GenICam mandatory functions)
GigE Vision Streaming Control Packet size, Delayed (Frame) read-out, inter-packet delay Jumbo Frame max. 16020 bytes. Default packet size 1476 bytes.
Indicators on rear panel Power/Hardware trigger, GigE Link, GigE activity
Operating temperature -5°C to 45°C
Humidity 20 - 80% non-condensing
Storage temp/humidity -25°C to 60°C / 20% to 80% non-condensing
Vibration 10G (20Hz to 200Hz, XYZ)
Shock 70G
Regulatory CE (RN61000-6-2 and EN61000-6-3), FCC part 15 class B, RoHS, WEEE
Power 12V DC ± 10% 7.5 w (typical in continuous mode)
Lens mount Universal P mount or Nikon F mount
Dimensions (W x H x D) 55 x 55 x 120 mm (excluding surface projection)
Weight 430 g

 



facebook.png twitter.png linkedin.png youtube.png
Prices and specifications subject to change without notice.