CCD & CMOS Cameras
Contact us for lowest price (800) 284-2288, (858) 565-1101,, or fax (858) 300-4193
2MP 2/3" Monochrome Progressive Scan CCD HD Camera

The JAI AM-201CL is a 2-megapixel industrial grade CCD camera offering a combination of HDTV resolution, high fidelity, and high frame rates. The AM 201CL features the KAI-02150 quad-tap sensor from Kodak, capable of providing full 1920 x 1080 monochrome resolution at 64 fps. A standard Camera Link digital interface supports 8-bit, 10-bit, or 12-bit output.

The AM201CL uses the Kodak CCD quad-tap architecture for rapid image acquisition, then combines the four taps into two for monochrome readout over a simple one-cable Camera Link base configuration. Built-in channel balancing capabilities are provided to ensure uniformity across the image.

The AM-201CL camera features user configurable AOI scanning (partial scanning), horizontal and vertical binning modes , and a variety of acquisition modes, including continuous, single-frame, and multi-frame capture. Advanced image pre-processing features range from auto-gain, auto-shutter, and pixel blemish compensation, to flat-field compensation, and a 256-point look-up table for gamma customization.

Like JAI other high resolution cameras, the AM 201CL incorporates a list of industrial grade features to maximize performance in machine vision environments. These include precise sensor alignment, advanced thermal management, a built-in temperature sensor, and rugged construction with extensive shock and vibration testing performed.

→ 2-megapixel HD industrial camera
→ 2/3" monochrome progressive scan CCD
→ 1920 (h) x 1080 (v) active pixels
→ High frame rate - 64 fps at full resolution (80 MHz output clock) (32 fps for RGB output)
→ 5.5μm x 5.5 μm square pixels
→ Automatic channel balancing for seamless quad-tap image
→ Programmable exposure to 1/100,000 sec. (10 μs)
→ Auto shutter, auto gain, and auto iris control options
→ Camera Link interface with 8, 10, or 12-bit monochrome/Bayer output or 8-bit RGB
→ Excellent thermal management for high image quality
→ Shock & vibration testing for real-world environments
→ Manual or auto gain control from -3 dB to 24 dB (0 to 24 dB for color)
→ User programmable partial scanning
→ Vertical and horizontal binning (monochrome only)
→ 256-point look-up table (LUT) for gamma control
→ Pixel blemish and flat-field compensation
→ Supports C-mount lenses

Sensor 2/3" progressive scan CCD (KAI-02150)
Pixel Clock 40 MHz
Frame rate, full frame 64 frames/sec.
Active area 10.56 mm (h) x 5. 94 mm (v), 12.12 mm diagonal
Cell size 5.5 μm (h) x 5.5 μm (v)
Active pixels 1920 (h) x 1080 (v)
Horizontal output freq. 34.6 KHz (1H = 28.875 μs, 80 MHz clock)
Read-out modes, Full 1920 (h) x 1080 (v) 64 fps
Read-out modes, In-camera interpolation 1920 (h) x 1080 (v) 32 fps (AB-201CL)
Read-out modes, Variable partial scan Any start line, any height, in 1L steps
Read-out modes, Variable partial scan (RGB) Any start line, any height, in 2L steps
Read-out modes, Binning (HxV) 1 x 2, 2 x 1, 2 x 2 (monochrome only)
Sensitivity (AM-201CL) 0.21 Lux (On sensor, max. gain, 50% video)
S/N ratio >57 dB. (0 dB gain)
Video signal output (80 MHz data clock) Camera Link 8-bit/10-bit/12-bit (monochrome, Bayer); Camera Link 8-bit (RGB)
Auto-iris lens video 0.7Vp-p, with 0.3V horiz. sync
Gain, Monochrome Manual/automatic -3 dB to 24 dB
Gain, Color Manual/automatic 0 dB to 24 dB
Gamma 0.45 to 1.0 or 256-point LUT
Synchronization Internal
Inputs Camera Link, TTL/75 O
Outputs, Camera Link LVAL, FVAL, DVAL, EEN
Outputs, TTL (Hirose 12-pin) XEEN
Trigger modes Timed (EPS), trigger width (PWC), edge dump (RCT), PIV, sequence (up to 16X)
Electronic shutter, Timed/PWC exposure 10 μs to 2 sec in 1 μs steps
Electronic shutter, Auto shutter 1/95 to 1/10,000 sec.
Electronic shutter, Exposure sequence Up to 16 different settings
Pre-processing functions Flat field compensation, pixel blemish compensation, 3 x 3 color interpolation (AB-201CL only)
Control interface Camera Link serial communication
Operating temperature -5° C to 50° C
Humidity (operation) 20 - 80% non-condensing
Storage temp./humidity -25° C to 60° C / 20% - 80 % non-condensing
Vibration 10G (20 Hz to 200 Hz XYZ)
Shock 70 G
Regulations CE (EN 61000-6-2, EN 61000-6-3), FCC part 15 class B, RoHS/WEEE
Power 12V to 24V DC ± 10%. 7.8W typical (full frame @ 12V)
Lens mount C-mount
Dimensions (H x W x L) C-mount 55 mm x 55 mm x 69 mm
Weight 280 g


facebook.png twitter.png linkedin.png youtube.png
Prices and specifications subject to change without notice.