CCD & CMOS Cameras
Contact us for lowest price (800) 284-2288, (858) 565-1101,, or fax (858) 300-4193
1.2" 4.2MP 2048X2048 Resolution Monochrome Progressive Scan CCD Camera, Camera Link Interface

The JAI RM-4200CL is a compact, very high-resolution (4.2 Megapixels) monochrome progressive scan CCD camera with dual-tap output, automatic channel balancing, and a frame rate of 15 fps at 2048 x 2048 resolution. A single-tap output mode is user selectable. The RM 4200CL features the latest Kodak KAI-4021 CCD imager for the best image quality and sensitivity.

The RM4200CL provides 12-bit linear output, or can be set to generate 10-bit/8-bit images modifiable by a patent-pending, built-in look-up table (LUT). Other features include image center partial scanning (250, 500, or 1000 lines), user-definable variable partial scanning (any number of lines with any starting point), flexible 2X binning (horizontal, vertical, or both), defective pixel compensation, and a PIV mode.

Camera parameters can be uploaded from the PC to the camera. Once these parameters are stored in EEPROMs, an instantaneous change from one setting to another can be done with a delay of a few frames in between.

Some of the functions that can be controlled by this interface are: manual, async and pulse-width control shuttering; save, load and report settings; and channel auto balancing.

A GigE Vision version of the RM-4200CL camera is also available: RM-4200GE.

→ 1.2" progressive scan IT CCD (Kodak KAI-4021)
→ 2048 x 2048 resolution @ 15 fps dual-tap
→ 7.4 µm square pixels
→ Software-selectable single-tap mode available @ 8 fps
→ 12-bit A/D (linear) or 8-bit/10-bit with look-up table (LUT)
→ Digital Camera Link output and analog output
→ Image center partial scan (1000, 500, 250 lines)
→ 2X2 binning and user-programmable variable partial scan
→ Full-frame shutter to 1/16,000 sec.
→ Asynchronous reset, no-delay, pulse width control shutter
→ Defective pixel compensation
→ PIV (particle imaging velocimetry) mode
→ Automatic channel balancing
→ PIV mode

Sensor 1.2" progressive scan interline transfer CCD
Active area 15.15mm x 15.15mm
Active pixels 2048 (H) x 2048 (V)
Cell size 7.4 μm x 7.4 μm
Readout modes, A 2048 (H) x 2048 (V) @ 15 Hz
Readout modes, B 2048 (H) x 1000 (V) @ 28 Hz (partial scan)
Readout modes, C 2048 (H) x 500 (V) @ 50 Hz (partial scan)
Readout modes, D 2048 (H) x 250 (V) @ 80 Hz (partial scan)
Readout modes, U User-definable partial scan
Synchronization Internal/External auto switch; HD/VD, 4.0 Vp-p impedance 4.7K Ohm; VD=14.79 Hz ± 2%, non-interlace; HD=30.78 kHz ± 2%
Pixel clock 40.00 MHz
S/N ratio > 58 dB
Sensitivity, Mono 0.12 lux f=1.4 (no shutter) @ 15 fps,
Video output, Analog 1.0 Vp-p, 75 Ohm
Video output, Digital 8-bit x 2-tap Base Camera Link; 10-bit x 2-tap Base Camera Link; 12-bit x 2-tap Base Camera Link
Gamma Programmable LUT (Gamma 1.0 std)
Shutter speed (programmable) 1/15 to 1/16,000 in increments of 32.5 μs
Lens mount C, F, M42 mount (use >1" format lenses)
Power 12V DC ± 10%, 520 mA (typical at 25° C)
Operating temperature -10° C to 50° C
Vibration 7 Grms (10 Hz to 2000 Hz) Random
Shock 70 G, 11 ms, half-sine
Dimensions (H x W x L) 51 mm x 51 mm x 74 mm
Weight 191 g (without tripod)


facebook.png twitter.png googleplus.png linkedin.png youtube.png pinterest.png
Prices and specifications subject to change without notice.