Search
By: JAI
http://www.avsupply.com/images/logos/jai-logo.jpg
CCD & CMOS Cameras
Contact us for lowest price (800) 284-2288, (858) 565-1101, sales@avsupply.com, or fax (858) 300-4193
1.2" 4.2MP 2048X2048 Resolution Color Progressive Scan IT CCD Camera, GigE Vision Interface

The JAI RMC-4200GE is a compact, very high-resolution (4.2 Megapixels) color progressive scan CCD camera with a dual-tap front-end, automatic channel balancing, GigE Vision digital output, and a frame rate of 15 fps at 2048 x 2048 resolution. A single-tap mode at 8 fps is user selectable. The RMC 4200GE features the latest Kodak KAI-4021 CCD imager equipped with a Bayer color filter array (host-based interpolation required).

The RMC4200GE provides 12-bit linear output, or can be set to generate 10-bit/8-bit images modifiable by a patent-pending, built-in look-up table (LUT). Other features include image center partial scanning (250, 500, or 1000 lines), user-definable variable partial scanning (any number of lines with any starting point), defective pixel compensation, and a PIV mode for advanced flow analysis.

The RMC-4200GE is supported by JAI's easy-to-use SDK and Control Tool software, offering straightforward setup and full GigE Vision and GenICam compliance. The camera also integrates smoothly with a variety of third-party GigE Vision software libraries and development tools.

A Camera Link version of the RMC-4200GE camera is also available: RMC-4200CL.
 

→ 1.2" progressive scan IT CCD (Kodak KAI-4021)
→ 2048 x 2048 resolution @ 15 fps dual-tap
→ 7.4 µm square pixels
→ Software-selectable single-tap mode available @ 8 fps
→ 12-bit A/D (linear) or 8-bit/10-bit with look-up table (LUT)
→ GigE Vision Ethernet output and analog output
→ 100 m with standard CAT 5E or CAT 6 cable
→ Image center partial scan (1000, 500, 250 lines)
→ 2X2 binning and user-definable variable partial scan
→ Full-frame shutter to 1/16,000 sec.
→ Asynchronous reset, no-delay, pulse width control shutter
→ Defective pixel compensation
→ PIV (particle imaging velocimetry) mode
→ Extensive software developer’s kit (SDK)

Sensor 1.2" progressive scan interline transfer CCD
Active area 15.15mm x 15.15mm
Active pixels 2048 (H) x 2048 (V)
Cell size 7.4 μm x 7.4 μm
Readout modes, A 2048 (H) x 2048 (V) @ 15 Hz
Readout modes, B 2048 (H) x 1000 (V) @ 28 Hz (partial scan)
Readout modes, C 2048 (H) x 500 (V) @ 50 Hz (partial scan)
Readout modes, D 2048 (H) x 250 (V) @ 80 Hz (partial scan)
Readout modes, U User-definable partial scan
Synchronization Internal/External auto switch HD/VD, 4.0 Vp-p impedance 4.7K Ohm; VD=14.79 Hz ± 2%, non-interlace; HD=30.78 kHz ± 2%
Pixel clock 40.00 MHz
S/N ratio > 58 dB
Sensitivity, Color 0.8 lux f=1.4 (no shutter) @ 15 fps, Pixel sensitivity: 31 μV/e-
Video output, Analog 1.0 Vp-p, 75 Ohm
Video output, Digital Gigabit Ethernet (8-bit/10-bit/12-bit)
Color (TMC/RMC-4200 only) Raw Bayer output for host-based interpolation
Gamma Programmable LUT (Gamma 1.0 std)
Shutter speed (programmable) 1/15 to 1/16,000 in increments of 32.5 μs
Lens mount C, F, M42 mount (use >1" format lenses)
Power 12V DC ± 10%, 590 mA (typical at 25° C)
Operating temperature -10° C to 50° C
Vibration 7 Grms (10 Hz to 2000 Hz) Random
Shock 70 G, 11 ms, half-sine
Dimensions (H x W x L) 51 mm x 51 mm x 85 mm
Weight 214 g (without tripod)

 



facebook.png twitter.png linkedin.png youtube.png
Prices and specifications subject to change without notice.