By: JAI Pulnix
JAI Pulnix Industrial-Grade Cameras
Contact us for lowest price (800) 284-2288, (858) 565-1101,, or fax (858) 300-4193
1/2" High Resolution Color Interlaced Scan CCD Camera

The JAI RMC-675 provides users with a 1/2" format color interlaced camera with excellent sensitivity and a wide range of advanced features. The Sony ICX429AKL CCD imager offers superior light gathering ability due to its advanced micro lens technology.

An integrated lens controller enables users to remotely operate the RMC 675's motorized lenses, pan & tilt heads, or any 3 external control channels. The single 15-pin connector is used for power, camera control, and video output, making installation clean and simple. All camera features are controllable via RS-232 commands over this single interface cable.

Designed with small size and ruggedness in mind, the RMC675 camera is suitable for a wide range of industrial, aerospace, and homeland security applications. Advanced options include Auto Level Control (ALC) to automatically adjust gain and shutter settings during changing light conditions; conformal coating; pixel blemish compensation; and extended temperature capability for operating in temperatures from -40 degrees C to 65 degrees C.

→ 1/2" high resolution interline transfer CCD color camera
→ 752 x 582 resolution @ 25 fps (PAL)
→ Micro, rugged construction
→ Shutter from 1/60 to 1/100,000 sec.
→ RS-232 adjustable manual gain, selectable ALC modes (optional),
→ shutter, gamma and AWB select
→ External sync in
→ Mount positionable on all four sides
→ Single 15 D-sub connector for video, RS-232 and power
→ Mirror Image-horizontal, enable/disable capability
→ Integrated 3-axis controller for remote adjustment of zoom, focus, iris, pan, tilt, etc.
→ Advanced options available
→ Sensor (RMC-675) 1/2" CCD interlace ICX429AKL

Active pixels 752 (H) x 582 (V)
Chip size 7.4 x 5.95 mm
Cell size 8.6 μm x 8.3 μm
Scanning 625 lines/50 Hz
Synchronization Internal/external auto switch; HD/VD 4.0 Vp-p impedance 10K Ohm; VD = interlace/non-interlace; HD = 15.62 kHz ± 50ppm
TV resolution 560 (H) x 420 (V)
S/N ratio >50 dB min. (AGC Off)
Sensitivity 0.25 lux (f=1.4) max. gain 50% video
Video output 1.0 Vp-p composite video, 75 Ohm
ALC, OP1-5 ON/OFF (RS-232 controlled)
Gamma 0.45/1.0 (RS-232 controlled) 1.0 Factory Default
Lens mount C-mount (adjustable)
Power requirement 12V DC, 199 mA typical at 25° C
Operating temperature, Standard -10° C to 50° C
Operating temperature, OP22-5-1 -40° C to 65° C (reduced performance may occur)
Storage temperature -50° C to 70° C
Vibration 7 Grms (20 Hz to 2000 Hz) Random
Shock 70 G, 11 ms, half-sine
Dimensions (H x W x L) 32 x 42 x 48.48 mm with mechanical enclosure; 29.3 x 39.4 x 35.66 mm without mechanical enclosure
Weight 113 g with mechanical enclosure; 69 g without mechanical enclosure


facebook.png twitter.png googleplus.png linkedin.png youtube.png pinterest.png
Prices and specifications subject to change without notice.