IP & PoE Over Coax Extender W/Weatherproof Transmitter

The Nitek Outdoor Rated Ethernet & PoE Extender EL 1500CW IP video over Coax network extender-PoE Inserter (EtherStretch). The system includes a receiver, transmitter, and a NEMA4X rated enclosure to house the transmitter unit. The system transmits IP cameras over coax and can quickly turn any ordinary RG59U coaxial cable into a high speed network communication & PoE path. When operating over RG59U coaxial cable, the coax network extender system can operate for distances of up to 500 meters (1,640 feet). The EL 1500 CW coax ethernet extender system consists of a weatherproof enclosure which houses the transmitter and also a receiver, which requires very little installation time & absolutely no set up or configuration. The EL-1500-CW ethernet over coax network extenders transmitter and receiver are transparent to the network and have no IP or MAC addressing. Simply connect your network devices to the network ports of the transmitter and receiver along with existing cabling and the system begins communicating. LED indicators show the status of network communication and PoE power.

When connected to a PoE switch, power from the switch is used as the power source for the connected EL-1500CW receiver. In applications where network switches are not PoE capable, an optional power Inserter (IP1054 sold separately) can be used to insert power to the EL1500 CW receiver. The power is sent from the receiver over the coax to the transmitter. The transmitter uses PoE as its power source and powers the connected PoE network device as well. The EL1500-CW coax network extender system extends network communications to overcome cable distance limitations offering connections to devices in locations traditional networking does not allow.

→ NEMA4X Rated Enclosure to House Transmitter
→ Transmits up to distances of 500 meters / 1,640 feet
→ Supports PoE and network communications
→ Supports any network device, including IP cameras
→ Fully transparent to the network
→ Built-in surge protection
→ Easy to install, no set up required
→ No MAC or IP addressing required
→ LED indicators for network signals, link status and power
→ Optional power supply can insert POE power for non-POE switches

Unit Size	1.1"H x 1.6"W x 4.93"D
Enclosure Size	2.25"H x 4.76"W x 7.125"D
Power Requirements	PoE or IP1054 PoE Inserter (48vdc @ 15.4watts)
Ethernet Connection	[1] Auto Configuring 10 / 100 RJ45 port
EtherStretch Link Connection	[1] Coaxial BNC Connector
LED Indicators	Link Status, Power, PoE Out, 10Mb or 100mb
Shipping Weight	5 lbs.
Mounting	Two 3/8" mounting slots
Operating Temperature	0 - 140 F Fahrenheit
Humidity	Up to 85% non-condensing