By: Nitek
Video Transmission Solutions
Contact us for lowest price (800) 284-2288, (858) 565-1101,, or fax (858) 300-4193
TCP/IP Transmission Over UTP W/POE - Up To 1,960 Feet (Transmitter & Receiver)

The Nitek Ethernet & PoE Extender EL1500U IP ethernet network extender-PoE Inserter (EtherStretch) can quickly turn any ordinary 4 pair category network cable into a high speed network communication & PoE path. When operating over a 4 pair category network cable, distances of up to 600 meters (1,960 feet) can be achieved. The EL1500 U IP video network extender system consists of a transmitter and a receiver set, which requires very little installation time & absolutely no set up or configuration. The transmitter and receiver are transparent to the network and have no IP or MAC addressing. Simply connect your network devices to the network ports of the transmitter and receiver along with existing cabling and the system begins communicating. LED indicators show the status of network communication and PoE power.

When connected to a PoE switch, power from the switch is used as the power source for the connected EL1500U receiver. In applications where network switches are not PoE capable, an optional power source (PS48 sold separately) can be used to insert power to the EL1500U receiver. The power is sent from the receiver over a 4 pair category cable to the transmitter. The transmitter use PoE as its power source and powers the connected PoE network device as well. The EL1500U UTP network extender extends network communications to overcome cable distance limitations offering connections to devices in locations traditional networking does not allow.


Available Configurations Include:

EL1500UW Outdoor IP Cameras over 4 pr UTP System w/PoE - up to 1,960 ft (Transmitter in weatherproof case)
EL1500UWS Outdoor IP Cameras over 4 pr UTP System w/PoE- 1,960 ft (Transmitter/IPPWR1 in weatherproof case)

EL1500U features include:

  • Transmits up to distances of 600 meters ⁄ 1,960 feet
  • Supports PoE and network communications
  • Supports any network device, including IP cameras
  • Fully transparent to the network
  • Built-in surge protection
  • Easy to install, no set up required
  • No MAC or IP addressing required
  • LED indicators for network signals, link status and power
  • Optional power supply can insert POE power for non-POE switches
Transceiver Unit
Size 1.1"H x 1.6"W x 3.6"D
Power Requirements PoE (IEEE 802.3af or at) or PS48 Power Supply
Ethernet Connection [1] Auto Configuring 10 ⁄ 100 RJ45 port
EtherStretch Link Connection [1] RJ45 port
LED Indicators Link Status, Power, PoE Out, 10Mb or 100mb
Shipping Weight 3 lbs.
Mounting Two 3⁄8 inch mounting slots
Operating Temperature -40 to 75 degrees C/-40 to 167 degrees F
Environmental NEMA TS-2 (see spec sheet download)

facebook.png twitter.png googleplus.png linkedin.png youtube.png pinterest.png
Prices and specifications subject to change without notice.