By: Nitek
Video Transmission Solutions
Contact us for lowest price (800) 284-2288, (858) 565-1101,, or fax (858) 300-4193
IP & PoE Over Coax Extender - Transmitter Unit

The Nitek IP & PoE Over Coax Extender - Transmitter Unit ET1500 C is a transmitter that extends Ethernet and PoE for distances up to 500 meters (1,640 ft.) over coaxial cable. Operates only with ER8500C or ER16500C Receivers.

The ET1500C IP video over Coax Transmitter is a network extender-PoE Inserter (EtherStretch) component. The ET1500C operates with either an ER8500C or ER16500C 8 or 16 Port IP Extender/Gigabit PoE Switch Receiver Unit, to form a multi-channel IP extender "over-coax" system. The System transmits IP cameras over coax and can quickly turn any ordinary RG59U coaxial cable into a high speed network communication & PoE path. When operating over RG59U coaxial cable, the coax network extender system can operate for distances of up to 500 meters (1,640 feet). ET1500C Transmitter is part of a system that operates in conjunction with either a ER8500C Eight Port Receiver or ER16500C Sixteen Port Receiver (these receivers are sold separately).

The ET1500C coax ethernet extender requires very little installation time & absolutely no set up or configuration. The ET1500C ethernet over coax network extender transmitter is transparent to the network and has no IP or MAC addressing. Simply connect your network devices to the network ports of the transmitter along with existing cabling and the system begins communicating. LED indicators show the status of network communication and PoE power.

Available Configurations Include:

ET1500CW Outdoor IP Cameras over Coax Transmitter w/PoE Injector-up to 1,640 feet 
ET1500CWS Outdoor IP Cameras over Coax Xmtr w/PoE- 1,640 ft (Transmitter/IPCOAX1 in weatherproof case)

ET1500C features include:

  • Transmits up to distances of 500 meters ⁄ 1,640 feet
  • Supports PoE and network communications
  • Supports any network device, including IP cameras
  • Fully transparent to the network
  • Built-in surge protection
  • Easy to install, no set up required
  • No MAC or IP addressing required
  • LED indicators for network signals, link status and power
  • Optional power supply can insert POE power for non-POE switches
Unit Transceiver
Size 1.1"H x 1.6"W x 4.93"D
Power Requirements PoE or PS48 Power Supply (48vdc @ 15.4watts)
Ethernet Connection [1] Auto Configuring 10 / 100 RJ45 port
EtherStretch Link Connection [1] Coaxial BNC Connector
LED Indicators Link Status, Power, PoE Out, 10Mb or 100mb
Shipping Weight 3 lbs.
Mounting Two 3/8" mounting slots
Operating Temperature 0 - 140 degrees Fahrenheit
Humidity Up to 85% non-condensing


facebook.png twitter.png googleplus.png linkedin.png youtube.png pinterest.png
Prices and specifications subject to change without notice.