16 Channel PoE Power Supply, With Management Feature

The Nitek 16 Channel PoE Power Supply with Management Feature IP 1648M managed 16 Port PoE Inserter-Mid Span Injector, a power supply for PoE compliant cameras and edge devices with a special management function that provides monitoring/control capability for each of the 16 ports for voltage, current and power consumption by means of a network port on the 1648M. The 19 inch 1U EIA rack mount chassis may be rack or shelf mounted. IP cameras or other network devices may be located up to 100m (328 ft.) from the IP-1648M managed 16 channel PoE injector. Nitek's EE328 repeater module can be utilized to extend the distance an additional 100m (328 ft.). The IP1648M is designed to be fully IEEE 802.3af compliant providing up to 15.4 watts of power per port at 48VDC. Each output is individually fused. The IP1648M installs in minutes and provides an economical means of service and installation of PoE devices.

→ Sixteen PoE device ports
→ Network management port allows for configuration and monitoring
→ 115VAC 50/60Hz, 2 amp input
→ Primary fuse rated at 5amps/250V
→ Provides 15.4 watts max. per channel
→ IEEE 802.3af compliant
→ Each output is individually fused
→ Individual port power status LED
→ IEC 320 - 3 wire ground line cord (detachable)
→ 1 RU chassis rack mount for use in a standard 19" rack

Unit	Transceiver
Size	1 RU x 9.5" (D)
Power Requirements	IEC380 power inlet 115V 2amps
Network Connection Method	(32) RJ45 jack connectors
Power Indication	LED's
Temperature	-20C to 65C
Network Type	10/100
Shipping Weight	11 lbs.