By: Kramer
Video & Computer Signal Processing Solutions
Contact us for lowest price (800) 284-2288, (858) 565-1101,, or fax (858) 300-4193
Computer Graphics Video, Stereo Audio & Bi-directional RS-232 Over Twisted Pair Transmitter With EDID

The TP-125EDID is a high-performance twisted pair transmitter for computer graphics video, unbalanced stereo audio and bi-directional RS-232 control command signals. The TP 125EDID converts the input signals to a twisted pair signal and transmits them over CAT 5 cable to a compatible receiver.

→ HDTV Compatible

→ Inputs 1 WUXGA on a 15-pin HD connector; 1 audio ANALOG 3.5mm mini jack
→ Output 1 RJ-45 OUT connector
→ Control RS-232 2-pin terminal block
→ RS-232 Baud Rate Up to 19200kbps
→ RS-232 Mode Full-duplex
→ Audio Bandwidth (-3dB) 20Hz to 20kHz @0.5dB
→ Resolution Up to WUXGA and 1080p
→ S/N Ratio Video: 58dB unweighted, 68.3dB @5MHz weighted; Audio: <-80dB
→ Total Gain Audio: Analog/analog: 0dB; Analog/SPDIF: -12dBFS
→ Coupling AC
→ THD N Audio: <0.01%
→ Power Source 12V DC, 60mA
→ Dimensions 12.1cm x 7.18cm x 2.42cm (4.76" x 2.83" x 0.95") W, D, H
→ Weight 0.3kg (0.67lbs) approx
→ Accessories Power supply
→ Options RK-3TB 19" rack mount adapter
→ System Range More than 300ft (more than 100m)
→ EDID Capture Copies and stores the EDID from a display device
→ Cable STP (shielded twisted pair) such as Kramer BC-STP CAT 5
→ bi-directional RS-232 Interface Commands and data can flow in both directions via the RS-232 interface, allowing status requests and control of the destination unit
→ Compact DigiTOOLS® 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter


facebook.png twitter.png linkedin.png youtube.png
Prices and specifications subject to change without notice.