Search

HDMI, Bi-directional RS-232 & IR Over Twisted Pair Transmitter

Contact us for lowest price (800) 284-2288 , (858) 565-1101 Call Now [email protected]

The TP-573 is a twisted pair transmitter for HDMI, bi-directional RS-232 and infrared signals. The TP 573 converts the input signals to a twisted pair signal and the TP-574 converts it back to HDMI, RS-232 and infrared signals.
 

→ HDTV Compatible
→ HDCP Compliant
→ 3D Pass-Through

→ Inputs 1 HDMI connector, 1 bi-directional IR port on a 3.5mm mini jack, 1 bi-directional RS-232 port on a 9-pin D-sub connector
→ Outputs 1 CAT 5 OUT on an RJ-45 connector
→ Bandwidth Supports up to 1.65Gbps bandwidth per graphic channel
→ Compliance with HDMI Standard Supports HDMI and HDCP
→ Power Source 12V DC, 510mA
→ Dimensions 12.1cm x 7.18cm x 2.42cm (4.76" x 2.83" x 0.95"), W, D, H
→ Weight 0.3kg (0.67lbs) approx
→ Accessories 12V DC power supply
→ Options RK-3T 19" rack mount, Kramer remote external receiver, Kramer BC DGKat524 (CAT 5 24AWG) and BC DGKat623 (CAT 6 23AWG) cables
→ HDMI Support HDMI (V.1.4 with Deep Color, x.v.Color™, Lip Sync, HDMI Uncompressed Audio Channels, Dolby TrueHD, DTS-HD)
→ EDID PassThru Passes EDID/HDCP signals from source to display
→ bi-directional RS-232 & IR Interface. 38400 max baud rate
→ DGKat™ Signal Integration Kramer's unique technology for converting TMDS as well as control and communication to signals that run over twisted pair cables. We strongly recommend using Kramer DGKat™ cables designed specifically for optimum performance
→ System Range Up to 90m (295ft) at 1080i, or up to 30m (98ft) at 1080p on shielded BC-DGKat524 cable. Up to 90m (295ft) at 1080i, or up to 70m (230ft) at 1080p on shielded BC-DGKat623 cable. Up to 100m (330ft) at 1080i or up to 90m (295ft) at 1080p on shielded BC-DGKat723 cable
→ Cable Requires shielded twisted pair (STP) cable. For optimum range and performance use, use Kramer's BC-DGKat524, BC-DGKat623 and BC-DGKat723 cables. Note that the transmission range depends on the signal resolution, graphics card and display used. The distance using non-Kramer CAT 5, CAT 6, and CAT 7 cables may not reach these ranges. Use only shielded cable where both ends of the shield are soldered to ground
→ Power Connect System™ A single connection to the transmitter powers both units
→ Compact DigiTOOLS® 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter

 

tp-573.pdfspec sheet


facebook.png twitter.png googleplus.png linkedin.png youtube.png
Prices and specifications subject to change without notice.