By: Kramer
Video & Computer Signal Processing Solutions
Contact us for lowest price (800) 284-2288, (858) 565-1101,, or fax (858) 300-4193
Computer Graphics Video, Stereo & S/PDIF Audio & RS-232 Over Twisted Pair Receiver With EMP Protection

The TP-124-od is a twisted pair receiver for computer graphics video, unbalanced stereo audio and RS-232 data signals. The TP-123-od converts computer graphics, audio, and RS-232 inputs to a twisted pair signal, and the TP 124-od converts the twisted pair signal back into computer graphics, audio and RS-232 data signals.

→ HDTV Compatible
→ Level (Gain) and EQ (Peaking) Controls

→ Input 1 RJ-45 OUT connector
→ Outputs Video: 1VGA/UXGA on a 15-pin HD connector; Audio: 1 audio S/PDIF RCA connector; 1 audio Analog 3.5mm mini jack
→ Max. Output Level Video: 1V; Audio: 2.5V
→ Communication RS-232 on 2-pin terminal block; maximum bitrate 19200bps
→ Controls Level: -7.5dB to 4.4dB,EQ.: 0dB to 33dBu (130m) @50MHz
→ Max. Resolution WXGA & 1080p
→ S/N Ratio Video: 58dB unweighted, 68.3dB @5MHz weighted; Audio: < -80dB
→ Total Gain Audio: Analog/analog: 0dB; Analog/SPDIF: -12dBFS
→ Coupling AC
→ THD N Audio <0.01%
→ Power Source 12V DC, 60mA
→ Dimensions 12cm x 7.5cm x 2.5cm (4.7" x 2.95" x 0.98") W, D, H
→ Weight 0.3kg (0.67lbs) approx
→ Accessories Power supply
→ Options RK-3T 19" rack adapter
→ Max. Resolution WUXGA & 1080p
→ EMP Protection Protected from voltage surges induced by the electromagnetic field of nearby lightning. The system does not protect against direct lightning strikes
→ Twisted Pair Connectors RJ-45 connectors
→ Audio Outputs Unbalanced stereo and S/PDIF (24-bit 48kHz) simultaneously
→ System Range Up to 100m (300ft), greater distances possible depending on resolution and cable
→ Cable UTP (unshielded twisted pair) or STP (shielded twisted pair) such as CAT 5
→ Power Connect™ System A single connection to the transmitter or receiver powers both units when the devices are within 50m (150ft) of each other
→ Unidirectional RS-232 Maximum bitrate 19.2kbps
→ RS-232 Connect™ System The unit can send RS-232 commands on the twisted pair cable on top of the video signal. All the system units must have RS-232 Connect to use this feature
→ Compact Kramer TOOLS™ 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter


facebook.png twitter.png googleplus.png linkedin.png youtube.png pinterest.png
Prices and specifications subject to change without notice.