Cable Management Rack

The Middle Atlantic MK-Series overall dimensions of cable management rack shall be 84.28” H x 23.96” W x (16.44”, 24.00”) D, depth of rail channels shall be (6.44”, 14.00”), depth at top including integrated cable tray shall be (12.44”, 19.88”). Useable height shall be 45 rackspaces. Weight capacity shall be 500 lbs., when properly loaded with the base securely anchored, and 800 lbs., when properly loaded with the base of the rack securely anchored and the top of the rack braced to a structural building component (Note: Installation of cable management racks can vary widely with all types of conditions. Please note that mounting equipment in cantilever fashion, which effectively changes the center of gravity of the rack, will lessen the overall ability of the rack to bear weight).

The MK shall come equipped with multi-position cable management rings in twenty places, multiple cable pass-through openings on front and sides of rack, and integrated cable trough at top of rack. Multiple raised cable lacing points for cable management shall be provided. MK-1945-24 Series enclosures shall satisfy the 2007 & 2010 CBC; 2006, 2009 & 2012 IBC; ASCE 7-05 (2005 Edition) & ASCE 7-10 (2010 Edition) and the 2006 & 2009 editions of NFPA 5000 for use in areas of high seismicity, Seismic Use Group III, Zone 4 or Seismic Design Category (SDC) “D” with lateral force requirements for protecting 500 lbs. of essential equipment in locations with the highest level of seismicity and top floor or rooftop installations with an Importance factor (Ip) of 1.5. MK series shall be GREENGUARD Indoor Air Quality Certified for Children and Schools. MK series shall be RoHS EU Directive 2002/95/EC compliant. MK shall be manufactured by an ISO 9001 and ISO 14001 registered company.

→ Oversized cable ducts manage massive cable bundles
→ Unique swiveling front D-rings provide patch cable management
→ Integral top cable tray, front & rear
→ Modern design incorporates captive fasteners
→ Hook and loop fasteners and front cable feed-through holes included
→ 100 rack screws included

2 mounting depths available

16-7/16" (6-3/8" useable) and New! 24" (14" useable)

MK-1945-24 shall be seismic certified to the following codes and standards

2007 & 2010 CBC; 2006, 2009 & 2012 IBC; ASCE 7-05 (2005 Edition) & ASCE 7-10 (2010 Edition) and the 2006 & 2009 editions of NFPA 5000 for use in areas of high seismicity – Zone 4 or Seismic Design Category (SDC) "D". These are designed for Mission Critical and/or High-Importance Installations in locations with the highest level of seismicity and top floor or rooftop installations including those within UBC and CBC Essential facilities or IBC, ASCE 7, and NFPA 5000 Seismic Use Group III facilities. For all codes, the Importance factor (Ip) is 1.5. Seismic Certified load capacity of 500 lbs.