Search

Sectional Wall Mount Rack

Middle Atlantic - DWR SERIES View Larger Image (in new window)

Middle Atlantic : DWR SERIES

Contact us for lowest price (800) 284-2288 , (858) 565-1101 Call Now [email protected]
The Middle Atlantic DWR-Series shall be constructed to swing open for component cabling access, center section shall pivot for either left or right opening.. Center section and back pan shall be 16-gauge steel, phosphate pre-treated and finished in a black textured powder coat. Rackrail shall be constructed of 11-gauge steel with tapped 10-32 mounting holes in universal EIA spacing with black e-coat finish and marked rack spaces. Rack shall have a rear knockout panel with 1/2”, 3/4”, 1", 1-1/2”, 2” and 3” electrical knockouts installed in base, and a rear knockout panel with 1/2”, 3/4”, 1”, 1-1/2”, 2” and 3” electrical knockouts, four Decora® cutouts, and BNC knockouts for UHF/VHF antennas installed in top. Large laser knockout on back pan shall have a 12-1/2” x 12-1/2” cutout for electrical pull-box. Fan knockouts on top and bottom shall allow for installation of up to four 4-1/2" fans.

The DWR rack shall have 2” knockouts, 4” knockouts for Wiremold 4000® Series raceways, and knockouts for UCP Series universal connector panels on the side. Top, bottom and sides shall feature vertical vent pattern. DWR Series enclosures shall satisfy the 2007 & 2010 CBC; 2006, 2009 & 2012 IBC; ASCE 7-05 (2005 Edition) & ASCE 7-10 (2010 Edition) and the 2006 & 2009 editions of NFPA 5000 for use in areas of high seismicity, Seismic Use Group III, Zone 4 or Seismic Design Category (SDC) “D” with lateral force requirements for protecting 140 lbs. of essential equipment in locations with the highest level of seismicity and top floor or rooftop installations with an Importance factor (Ip) of 1.5 when used with DWRSR-ZL Latch. Rack shall be UL Listed in the US and Canada. Rack shall be DWR-24-22 US PATENT# 7, 278, 183 SEISMIC CERTIFIED EIA/TIA Compliant Backpan Center Section see inside for important information regarding useable depths GREENGUARD Indoor Air Quality Certified for Children and Schools. Rack shall be RoHS EU Directive 2002 / 95 / EC compliant. Rack shall be manufactured by an ISO 9001 and ISO 14001 registered company. Rack shall be warrantied to be free from defects in materials or workmanship under normal use and conditions for the lifetime of the rack.

Breakthrough design provides more useable rack height – for example, the 45 space version overall height is shorter than 44 space alternative models
Accepts patent-pending LeverLock™ system accessories for fast, flexible cable management and mounting of small devices such as interface boxes, power supplies, and relay modules
Unique new extender bay adds 3" of useable depth to the front or rear of the enclosure at any time. Extender bays allow the use of existing doors and can even be stacked for greater depths
Pre-threaded ganging holes allow ganging while fully loaded
Wide open bottom accepts multiple base options
Standard front and rear adjustable wide, heavy-gauge, 10-32 threaded rackrail with numbered rackspace increments speeds equipment mounting
Labels included to indicate rail position front to back
Finished in a durable black textured powder coat
UL Listed in the US and Canada
Tool-Free Quick-Mount™ system allows for easy, one-person mounting of the center section to the backpan on the jobsite
Available in 15”, 20”, 24" and 30” useable depths
Welded construction provides up to a 300 lb. weight capacity, depending on model
Abundant built-in cable lacing points in interior
½”, 34”, 1”, 1 ½”, 2” and 3” electrical knockouts and 5/8” UHF/VHF antenna knockouts on top & bottom, easily removable for cable pass-through
12 ½” x 12 ½” laser knockout opening in the backpan for electrical pull-box
Abundant Velcro and internal cable tie points
Finished in a durable black textured powder coat
Standard adjustable front 11-gauge 10-32 threaded rackrail with marked rackspace increments to speed equipment mounting
Center section hinges for left or right opening accessories
2" knockouts, 4" knockouts for Wiremold® 4000 Series raceways, and knockouts for UCP series universal connector panels on side
Grounding/bonding stud in top and bottom of center section and backpan facilitates proper grounding and bonding of electronic equipment, as per NEBS and NEC standards
Front Mounted Minimum-Clearance Latch saves valuable wall space by allowing wall racks to be placed side-by-side, in a corner, or wherever side clearance is an issue.
Seismic certified to the following codes and standards 2007 & 2010 CBC; 2006, 2009 & 2012 IBC; ASCE 7-05 (2005 Edition) & ASCE 7-10 (2010 Edition)

and the 2006 & 2009 editions of NFPA 5000 for use in areas of high seismicity – Zone 4 or Seismic Design Category (SDC) "D". These are designed for Mission Critical and/or High-Importance Installations in locations with the highest level of seismicity and top floor or rooftop installations including those within UBC and CBC Essential facilities or IBC, ASCE 7, and NFPA 5000 Seismic Use Group III facilities. For all codes, the Importance factor (Ip) is 1.5. Seismic Certified load capacity of 140 lbs. when used with DWRSR-ZL Latch.


facebook.png twitter.png googleplus.png linkedin.png youtube.png
Prices and specifications subject to change without notice.