Plug-on Microphone Transmitter - Wired / Wireless

Practically any wired microphone can be a player in the Sennheiser SKP 2000 XP ensemble. This plug-on transmitter makes it possible. Five frequency ranges with up to 75 MHz switching bandwidth also provide optimum flexibility for all components in the 2000 series. The transmitter settings on SKP2000XP can also be synchronized quickly and easily using infrared technology. Equipped with triple switchable transmission power and phantom powering, SKP 2000 is incredibly versatile.

→ Rugged metal housing
→ Up to 75 MHz switching bandwidth
→ 20 fixed frequency banks with up to 64 compatible presets
→ 6 banks each with up to 64 tunable channels
→ Frequency setting in 25 kHz steps
→ Pilot tone squelch for interference-free operation
→ 48 V switchable phantom powering
→ Backlit display on transmitter (keystroke activation)
→ Auto-lock feature to prevent buttons from accidently being pressed
→ Audio and RF MUTE feature for muting the transmitter
→ Transmitters can be configured from the receiver menu
→ Can be synchronized with the receiver using infrared interface
→ Wide range of accessories for virtually any use

Modulation	FM
RF frequency range	516 - 865 MHz
Carrier Frequency	max. 3,000
Switching bandwidth	max. 75 MHz
RF output power	100 mW
Nominal deviation	±24 kHz
Peak deviation	±48 kHz
Compander	HDX
Frequency response	80 - 18,000 Hz
Total harmonic distortion (THD)	< 0.9%
Signal-to-noise-ratio	≥ 120 dBA (@ 1 mV peak deviation)
In compliance with	CE, FCC, IC
XLR connector	XLR-3 female
Battery	2 x 1.5 V (AA)
Operating time (transmitter)	> 8 h (P48: 5h)
Input voltage range	mic 1.2 V max
Dimensions (transmitter)	105 x 43 x 43 mm
Weight (transmitter)	195 g