Search

Case Type Cube Camera, 560 TVL

Contact us for lowest price (800) 284-2288 , (858) 565-1101 Call Now [email protected]

The Sentech STCC42A is an industrial grade, CCIR, 2:1 interlace camera, with a 1/2", monochrome CCD. These cameras are designed and machined with very tight tolerances to have optimal CCD centering quality. This series of camera is extremely reliable, provides a high quality image and is very cost effective. The STC C42A ultra-compact housing has manual dip switches for on-the-fly adjustments and the camera can be controlled via RS232 software.

 

Also Available: STC-HC42A

STC-C42A features include:

→ 1/2" B/W CCD Image Sensor, 560 TV Lines
→ Cube Camera 1.1" x 1.1" x 1.82"
→ HD / VD Sync. & Field Frame

Image Sensor 1/2" Interline CCIR CCD: ICX419AL
Total Picture Element 795 (H) x 596 (V)
Active Picture Element 752 (H) x 582 (V)
Chip Size 7.40 (H) x 5.95 (V) mm
Cell Size 8.6 (H) x 8.3 (V) µm
Scanning System 2:1 Interlace
Vertical Frequency (Frame Rate) 50.00 Hz
Pixel Frequency 14.1875 MHz
Resolution 560 TV lines
S/N Ratio 56 dB (GAIN 0dB)
Minimum Scene Illumination 0.04 Lux at F1.2, 20 IRE; 0.1 Lux at F1.2, 50 IRE
Sync System Internal / External
Video Output 1.0 Vp-p / 75 Ω, DC coupling
Shutter Speed - Dip Switch OFF; 1/50; 1/100; 1/120; 1/250; 1/500; 1/1,000; 1/2,000; 1/4,000; 1/8,000; 1/10,000; 1/20,000; 1/100,000 second
Shutter Speed - Communication OFF; 1/50 to 1/100,000 second (Variable at every H and clock)
Integration Field / Frame
Gain 0 to 27 dB
Gamma 1/ 0.45
Power - Input Voltage 12 Vdc /10%
Power - Consumption Less than 1.8 W
Communication RS232 via 12pin connector
Dimensions 28 (X) 28 (H) x 46.3 (D) mm including the lens mount and the connector
Optical Filter No IR cut filter
Optical Center Accuracy Positional accuracy in H and V directions: /0.31 mm Rotational accuracy of H and V: /2.1 deg.
Material - Case Front, base and rear: Aluminum die cast (ADC12); Cover: Steel sheet covered with zinc
Material - Tripod Polycarbonate ABS
Lens Mount C mount
Interface Connector HR10A-10R-12PB (Hirose) or equivalent
Tripod Tripod can be attached to 4 plates (4 screws on the bottom plate, 3 screws on the other 3 plates)
Weight Approximately 52g (Camera 43g, Tripod: 9g)
Temperature and Humidity - Operational -5 to 50 deg. C
Temperature and Humidity - Storage -30 to 50 deg. C
Vibration 20Hz to 200Hz to 20Hz (5min./cycle), acceleration 10G, 3 directions 30 min. each
Shock Acceleration 70G, half amplitude 6ms, 3 directions 3 times each
Standard Compliancy EMS: EN61000-6-2, EMI: EN55011 (Class B)
RoHS RoHS Compliant

 



facebook.png twitter.png googleplus.png linkedin.png youtube.png
Prices and specifications subject to change without notice.