1/3" Interline Progressive CCD SXVGA 22 fps 1280 x 960 Monochrome Camera

The STCTB133USBAH is a compact, progressive scan, SXGA, USB cased camera with a 1/3� monochrome CCD, featuring 22fps, software and hardware triggering, image capture, digital zoom and a feature-rich user based menu setup and control.

This STC TB133USB AH cased camera is the same as the ASH model except that the USB signal is output over the USB connector. Sentech USB cameras include a SDK, DirectX, Twain and Linux driver, as well as the Sentech Viewing Software.

→ 1/3" CCD Image Sensor, SXVGA (1.25 Megapixel)
→ Output over USB Connector, 22fps
→ Hardware & Software Trigger

Imager	1/3” Interline SXVGA Monochrome Progressive CCD: ICX445AL
Total Picture Element	1348 (H) x 976 (V)
Active Picture Element	1296 (H) x 966 (V)
Chip Size	6.26 (H) x 5.01 (V) mm
Cell Size	3.75 (H) x 3.75 (V) µm
Scanning System	Progressive
Scanning Methods	Full Scanning, 1/1 Partial Scanning, ½ Partial Scanning, 1/4 Partial Scanning, Variable Partial Scanning, Binning, Binning 1/1 Partial Scanning, Binning 1/2 Partial Scanning, Binning 1/4 Partial Scanning, Binning Variable Partial Scanning
Pixel Frequency	36.818 MHz (Normal) / 18.4090 MHz (1/2 clock) / 9.20453 MHz (1/4 clock)
Maximum Frame Rate - Full Scanning	22.40 fps (Normal) / 11.20 fps (1/2 clock) / 5.600 fps (1/4 clock)
Maximum Frame Rate - 1/2 Partial	44.81 fps (Normal) / 22.40 fps (1/2 clock) / 11.20 fps (1/4 clock)
Maximum Frame Rate - 1/4 Partial	89.80 fps (Normal) / 44.90 fps (1/2 clock) / 22.45 fps (1/4 clock)
Resolution	1280 (H) x 960 (V) (Full Scanning) 1280 (H) x 440 (V) (1/2 Partial Scanning) 1280 (H) x 168 (V) (1/4 Partial Scanning)
S/N Ratio	≤ 10 digit (Factory Default Gain Setting)
Minimum Scene Illumination	3.94 Lux at F1.2
Sync System	Internal
Electronic Shutter	Auto / Manual (Software Selectable)
Normal	1/36,818182 to 1/22.40 seconds
1/2 Clock	1/18,409,091 to 1/11.20 seconds
1/4 Clock	1/9,204,545 to 1/5.60 seconds
Gain	Auto / Manual (Software Selectable)
Gamma	Manual (Software Selectable)
White Balance	Auto / Manual / One shot (Software Selectable)
Trigger Mode	Free-run / Edge Preset Trigger / Pulse Width Trigger / Start & Stop Trigger (Software selectable)
Input / Output	USB2.0 High Speed
Power - Input Voltage	5 Vdc through USB connector or 12Pin connector
Power - Consumption	Less than 430 mA
Dimensions	50 (W) x 50 (H) x 35.8 (D) mm
Lens Mount	CS Mount
Input / Output Connector	12 Pin Connector (Hirose) / 2.5 mm Pin Jack
Tripod	1/4”-20UNC depth 7 screw hole on top and bottom case, 4-M4 depth 4 screw holes on top, bottom and both side of case
Weight	Approximately 112g
Temperature - Operational	0 to 40 deg. C
Temperature - Storage	-30 to 65 deg. C
Vibration	20 Hz to 200 Hz to 20 Hz (5 min. /cycle), acceleration 10G, 3 directions 30 min. each
Shock	Acceleration 70G, half amplitude 6 ms, 3 directions 3 times each
Standard Compliancy	EMS :EN61000-6-2, EMI :EN61000-6-3 (Class B)
RoHS	RoHS Compliant