Search

4MP High Speed CMOS 80fps, Camera Link Camera - Color

Sentech - STC-CMC4MCL View Larger Image (in new window)

Sentech : STC-CMC4MCL

Contact us for lowest price (800) 284-2288 , (858) 565-1101 Call Now [email protected]

The Sentech STCCMC4MCL is part of the high-speed, CMOS Camera Link Camera series. This color camera uses the C-MOSIS 4 Megapixel sensor which outputs full resolution at 380 fps.

The STC CMC4MCL also provides full triggering capabilities, a configurable AOI (Area of Interest) and comes in a small package of 50 (W) x 50 (H) x 42 (D) mm.
 

STC-CMC4MCL features include:

→ High Performance Machine Vision Camera w/ Full Triggering
→ 1" CMOS Sensor, High Speed Data Rate
→ Fully Configurable AOI (Area of Interest)

Imager 1" 4 Megapixel Color Progressive CMOS (CMOSIS: CMV4000)
Active Picture Element 2048 (H) x 2048 (V)
Chip Size 11.264 (H) x 5.984 (V) mm
Cell Size 5.5 (H) x 5.5 (V) μm
Scanning System Progressive
Scanning Method Full scanning, Variable partial scanning
Vertical Frequency (Frame Rate) 8-bit 10TAP: 180 Hz / 10-bit MEDIUM: 80 Hz (8-bit FULL / 8-bit MEDIUM / 8-bit BASE / 10-bit BASE is selectable via communication)
Horizontal Frequency 8-bit 10TAP: 372 kHz / 10-bit MEDIUM: 164 kHz
Pixel Frequency 8-bit 10TAP: 48 MHz / 10-bit MEDIUM: 21.25 MHz
Noise Level ≤ 3 Digit (Gain 0 dB)
Sync System Internal
@ 8Bit Output 10TAP / FULL / MEDIUM / BASE configuration
@ 10Bit Output MEDIUM / BASE configuration
Shutter Speed OFF, 45 seconds to 1/372,093 seconds (Variable at line)
Digital Gain 1x to 4x
Gamma 1.0
Input Voltage 12 Vdc ± 10%
Consumption Less than 4.5 W
Trigger Mode Edge preset trigger (V-reset, Non-reset); Pulse width trigger (V-reset, Non-reset)
Communication RS232 via Camera Link connector
Dimensions 50 (W) x 50 (H) x 42 (D) mm (Excluding the connector)
Optical Filter No IR cut filter
Material Aluminum (AC)
Lens Mount C mount
Interface Connector Camera Link connector: SDR connector x 2; Power/IO connector: HR10A-7R-6PB (Hirose) or equivalent
Weight Approximately 140 g
Operating Temperature -5 to 40 deg. C
Storage Temperature -30 to 65 deg. C
Vibration 20 Hz to 200 Hz to 20 Hz (5 min. cycle), acceleration 10G, 3 directions 30 min. each
Shock Acceleration 70G, half amplitude 6ms, 3 directions 3 times each
Standard Compliancy EMS: EN61000-6-2, EMI: EN55011 (Class B)
RoHS RoHS Compliant

 



facebook.png twitter.png googleplus.png linkedin.png youtube.png
Prices and specifications subject to change without notice.