stc-po.jpg View Larger Image (in new window)

Sentech : STC-POCLC83A-44

By: Sentech
Industrial, USB, & Medical Cameras
Contact us for lowest price (800) 284-2288, (858) 565-1101,, or fax (858) 300-4193
1/3" Interline Progressive CCD Color Camera
The Sentech STCPOCLC83A44 is a full featured, cost effective, XGA, progressive scan, digital Power Over Camera Link « cube camera with a 1/3" color CCD.

STC POCLC83A 44 features a full frame, 30fps, XGA output, partial scanning, triggering, and reset capabilities.

1/3" CCD Image Sensor
XGA, Progressive Scan, 30fps
Power Over Camera Link
Imager 1/3” Interline XGA Color Progressive CCD: ICX204AK
Total Picture Element 1077 (H) x 788 (V)
Active Picture Element 1024 (H) x 768 (V)
Chip Size 5.8 (H) x 4.92 (V) mm
Cell Size 4.65 (H) x 4.65 (V) ┬Ám
Scanning System Progressive
Scanning Method Full, Partial full, 1/2 partial, 1/4 partial, Variable partial
Vertical Frequency (Frame Rate) 43.77 Hz
Horizontal Frequency 34.84 kHz
Pixel Frequency 44.25 MHz
S/N Ratio - @ 8bit output ≤ 3 Digit (Gain 0 dB)
S/N Ratio - @ 10bit output ≤ 10 Digit (Gain 0 dB)
Minimum Scene Illumination 0.25 Lux at F1.2
Sync System Internal / External
Video Output Digital 8 or 10 bit CameraLink® (Base Configuration)
Tap 1 Tap
Shutter Speed OFF, 1/5 to 1/96,000 seconds (Variable at every H and clock)
Gain 0 ~ 27 dB
Gamma 1.0
Power Supply - Input Voltage 12 Vdc ┬▒ 10% via Camera Link connector
Power Supply - Consumption < 1.8W
Trigger Mode Edge Preset Trigger (V-reset, Non-reset); Pulse Width Trigger (V-reset, Non-reset)
Communication RS232 via Camera Link connector
Dimensions 28 (W) x 28 (H) x 29.5 (D) mm (not including lens mount and the connector)
Optical Filter No IR cut filter
Optical Center Accuracy Positional accuracy in H and V directions: /0.31 mm Rotational accuracy of H and V: /2.1 deg.
Material - Case Front, base, and rear: Aluminum die cast (ADC 12) Cover: Steel sheet covered with zinc
Material - Tripod Polycarbonate ABS
Lens Mount C mount
Interface Connector HR 10A-7R-6PB (Hirose) or equivalent
Tripod Tripod can be attached to 4 plates (4 screws on the bottom plate, 3 screws on the other 3 plates)
Weight Approximately 52g (Camera: 43g, Tripod: 9g)
Temperature and Humidity - Operational Temperature: -5 to 50 deg. C; Relative Humidity: 0 to 85% (No condensation)
Temperature and Humidity - Storage Temperature: -30 to 65 deg. C; Relative Humidity: 0 to 90% (No condensation)
Vibration 20 Hz to 200 Hz to 20 Hz (5 min. /cycle); Acceleration 10G, 3 directions 30 min. each
Shock Acceleration 70G, half amplitude 6 ms, 3 directions 3 times each
Standard Compliancy EMS: EN61000-6-2, EMI: EN55011 (Class B)
RoHS RoHS Compliant

facebook.png twitter.png googleplus.png linkedin.png youtube.png pinterest.png
Prices and specifications subject to change without notice.