stc-rcl.jpg View Larger Image (in new window)

Sentech : STC-RCL33A-R3

By: Sentech
Industrial, USB, & Medical Cameras
Contact us for lowest price (800) 284-2288, (858) 565-1101,, or fax (858) 300-4193
1/3" Interline Progressive CCD Cylinder/Rectangular Type Remote Head Monochrome Camera
The Sentech STCRCLC33AR3 is a full featured, rectangle remote head, cost effective, VGA, progressive scan, digital Camera Link cube camera with a 1/3" monochrome CCD.

STC RCLC33A R3 features a full frame, 90fps, VGA output, partial scanning, triggering, and reset capabilities.

1/3" CCD Image Sensor
VGA, Progressive Scan, 90fps
Rectangle Remote Head Type
Imager 1/3” Interline VGA Monochrome Progressive CCD: ICX424ALB
Total Picture Element 692 (H) x 504 (V)
Active Picture Element VGA: 648 (H) x 494 (V)
Chip Size 5.79 (H) x 4.89 (V) mm
Cell Size 7.4 (H) x 7.4 (V) µm
Scanning System Progressive
Scanning Method Full, Partial full, 1/2 partial, 1/4 partial, Variable partial, Binning (Partial, 1/2 partial, 1/4 partial, Variable partial)
Horizontal Frequency 47.2028 kHz
Pixel Frequency 36.8181 MHz
S/N Ratio (Standard Deviation) - @ 8Bit Output ≤ 3 Digit (Gain 0 dB)
S/N Ratio (Standard Deviation) - @ 10Bit Output ≤ 10 Digit (Gain 0 dB)
Minimum Scene Illumination 0.11 Lux at F1.2
Sync System Internal / External
Video Output Digital 8 or 10 bit Camera Link (Base Configuration)
Tap 1 Tap
Shutter Speed OFF, ½ to 1/100,000 sec. (Variable at every H and clock)
Gain 0 to 27 dB
Gamma 1.0
Power Supply - Input Voltage 12 Vdc ± 10%
Power Supply - Consumption < 3.5 W
Trigger Mode Edge Preset Trigger (V-reset, Non-reset); Pulse Width Trigger (V-reset, Non-reset)
Communication RS232 via Camera Link connector
Dimensions - CCU 28 (W) x 28 (H) x 36.5 (D) mm Not including the connector
Dimensions - Head 12 (W) x 12 (H) x 44 (D) mm
Optical Filter No IR cut filter
Optical Center Accuracy Positional accuracy in H and V directions: /0.31 mm Rotational accuracy of H and V: /2.1 deg.
Material - Case Front, base, and rear: Aluminum die cast (ADC 12) Cover: Steel sheet covered with zinc
Material - Tripod Polycarbonate ABS
Lens Mount M10.5 (P=0.5) (Male screw)
Interface Connector HR 10A-7R-6PB (Hirose) or equivalent
Weight Approximately 150g
Temperature and Humidity - Operational Temperature: -5 to 50 deg. C; Relative Humidity: 0 to 85% (No condensation)
Temperature and Humidity - Storage Temperature: -30 to 65 deg. C; Relative Humidity: 0 to 90% (No condensation)
Vibration 10 Hz to 150 Hz, 0.35 half amplitude (Maximum acceleration 50 m/s2); 3 directions 8 times each
Shock Acceleration 150 m/s2, 6 directions 10 times each
Standard Compliancy EN61326; 1997/AnnexA A1, 1998 (EMI: Class B) A2: 2001
RoHS RoHS Compliant

facebook.png twitter.png linkedin.png youtube.png
Prices and specifications subject to change without notice.