Industrial Imaging
Contact us for lowest price (800) 284-2288, (858) 565-1101,, or fax (858) 300-4193
5 Mega-pixel Camera Link with Highly Rigid Case and Compact Design

The Ricoh FV-L500B1 5MP Camera Link with sturdy
construction and compact design is Used for the inspection of displays, solder defects and high precision flaw detection of semiconductors, liquid crystal and plasma flat panel displays, circuit boards, etc

FV-L500B1 features include:

→ 35 mmx35 mm compact design
→ Uses PoCL (Power over Camera Link), which has a strong track record as a high-resolution digital camera interface
→ Various trigger modes (pulse width, edge preset trigger) as standard features
→ In addition to camera tripod screw holes, M4 screw holes are located on four sides (top, bottom, left, right)
→ To increase mounting precision, mounting holes are arranged based on the CCD optical axis

Imager 2/3" interline 5.0 Mega pixels monochrome progressive CCD
Active picture elements 2448 (H) x 2058 (V)
Cell size 3.45 (H) x 3.45 (V) μm
Vertical frequency (Frame rate) 16 Hz
Horizontal frequency 33.264 kHz
Pixel frequency 64 MHz
Minimum scene illumination 0.24 lux at F1.2
Sync. System Internal
Video output Digital 8 , 10 or 12 bit Raw Data (Base configuration)
Shutter speed OFF, 1/8 to 1/209,000 sec. (Variable at every H and clock)
Gain 0 to 18.309 dB
Gamma 1.0
Input voltage 12 Vdc ± 10%
Consumption Less than 4.0 W
Dimensions 35 (W) x 35 (H) x 40.7 (D) mm (excluding the connector)
Lens mount C mount
Weight Approximately 80 g
Operational temperature -5 to 40 deg. C
Storage temperature -30 to 65 deg. C
High-speed frame rate of 5M 16 fps

facebook.png twitter.png linkedin.png youtube.png
Prices and specifications subject to change without notice.