25 Inch OLED Medical Grade LCD Monitor

Welcome to a new realm of surgical clarity, accuracy, and brilliance. Introducing the PVM-2551MD, world’s first 25-inch OLED surgical monitor, featuring Sony’s TRIMASTER EL technology, for a wide variety of endoscopic and surgical applications. OLED (Organic Light- Emitting diode) is the next-generation flat-panel screen technology with exceptional image quality that outperforms liquid-crystal display (LCD).

The PVM 2551MD features a full HD OLED panel using Sony’s unique "Super Top Emission" structure and also comes equipped with an advanced signal processor that brings out the full performance of the OLED. This combination delivers deep, rich blacks, high-contrast accurate color reproduction even in dark areas, and a response time more than 10 times faster than standard LCD.

→ Features Sony TRIMASTER EL OLED technology
→ 25-inch Full HD OLED panel 1920 x 1080 pixels
→ 10-bit panel driver for each RGB color, provides smooth and accurate color reproduction
→ Delivers deep rich blacks, high-contrast accurate color reproduction even in dark areas
→ Response time more than 10 times faster than standard LCD technology
→ Displays the largest color range of any Sony monitor previously offered
→ Variety of Scan and display modes
→ Sleek flat-panel design
→ Variety of video inputs including Composite, Y/C, RGB/Component, HD15, and DVI-D as standard
→ Features two built-in option slots to greatly expand the range of input signals the monitor can accept.

Panel	OLED panel
Picture size (diagonal)	24 5/8 inches (623.4 mm)
Effective picture size (H x V)	21 1/2 x 12 1/8 inches (543.4 x 305.6 mm)
Resolution (H x V)	1920 x 1080 pixels (Full HD)
Aspect	16:9
Pixel efficiency	99.99%
Panel drive	RGB 10-bit
Viewing angle (panel specification)	89°/89°/89°/89° (typical) (up/down/left/right, contrast > 10:1)
Composite input (NTSC/PAL) connector	BNC type (x1), 1 Vp-p ±3 dB sync negative
Y/C input connector	Mini-DIN 4-pin (x1); Y: 1 Vp-p ±3 dB sync negative, C: 0.286 Vp-p ±3 dB (NTSC burst signal level); 0.3 Vp-p ±3 dB (PAL burst signal level)
RGB/component input connectors	BNC type (x3), RGB: 0.7 Vp-p ±3 dB (Sync On Green, 0.3 Vp-p sync negative); Component: 0.7 Vp-p ±3 dB (75% chrominance standard color bar signal)
External synchronized input connector	BNC type (x1); 0.3 Vp-p to 4.0 Vp-p ± bipolarity ternary or negative polarity binary
HD15 input connector	D-sub 15-pin (x1); R/G/B: 0.7 Vp-p, sync positive (Sync On Green, 0.3 Vp-p sync negative); Sync: TTL level (polarity free, H/V separate sync); Plug & Play function: corresponds to DDC2B
DVI-D input connector	DVI-D (x1), TMDS single link
Parallel remote	Modular connector 8-pin (x1)
Serial remote (LAN)	D-sub 9-pin (RS-232C) (x1); RJ-45 modular connector (x1) (Ethernet, 10BASE-T/100BASE-TX)
Optional input port	2 ports, Signal format: H: 15 kHz to 45 kHz, V: 48 Hz to 60 Hz
DC IN connector	XLR-type 4-pin (male) (x1), DC 5 V/24 V (output impedance 0.05 ohms or less)
Composite output connector	BNC type (x1), Loop-through, with 75 ohms automatic terminal function
Y/C output connector	Mini-DIN 4-pin (x1), Loop-through, with 75 ohms automatic terminal function
RGB/component output connectors	BNC type (x3), Loop-through, with 75 ohms automatic terminal function
External synchronized output connector	BNC type (x1), Loop-through, with 75 ohms automatic terminal function
Power - OLED monitor (PVM-2551MD)	DC IN: 24 V/5.0 A, 5 V/0.030 A (Supplied from AC adaptor)
Power - AC Adaptor (Sony, AC-110MD)	AC IN: 100 V to 240 V, 50/60 Hz, 1.53 A to 0.58 A; DC OUT: 24 V/5.0 A, 5 V/0.060 A
Power consumption	Approx. 135 W (max.); Approx. 80 W (average power consumption in the default status)
Operating conditions - Temperature	32°F to 95°F (0°C to 35°C)
Operating conditions - Recommended temperature	68°F to 86°F (20°C to 30°C)
Operating conditions - Humidity	30% to 85% (no condensation)
Operating conditions - Pressure	700 hPa to 1060 hPa
Storage and transport temperature	–4°F to 140°F (–20°C to 60°C)
Storage and transport humidity	0% to 90% (no condensation allowed)
Storage and transport pressure	700 hPa to 1060 hPa
Dimensions (W x H x D)	24 3/8 x 14 7/8 x 4 1/8 inches (618.4 x 376 x 102.1 mm) (without a stand); 24 3/8 x 18 5/8 x 12 inches (618.4 x 471.5 x 302 mm) (with SU-560 optional stand)
Mass	17 lb 14 oz (8.1 kg) (when the optional stand and the input adaptor are not installed); 18 lb 12 oz (8.5 kg) (when the optional stand is not installed and two BKM-229X are installed)
Accessories supplied	AC adaptor (AC-110MD) (1), AC power cord (1), AC plug holder (2), Instructions for Use (1), CD-ROM (1), Using the CD-ROM Manual (1), Quick Reference (1), When You First Use the Monitor (1), Sales Companies Guide (1)
Optional accessories	SDI 4:2:2 input adaptor (BKM-220D) (1), HD/D1-SDI input adaptor (BKM-243HS) (1), NTSC/PAL input adaptor (BKM-227W) (1), Analog component input adaptor (BKM-229X) (1), 3G/HD/SDI input adaptor (BKM-250TG) (1), DVI-D input adaptor (BKM-256DD) (1), Monitor stand (SU-560) (1)
16	9 Aspect Ratio