SXGA Progressive Scan PoCL (Power over Camera Link) Camera

Sony has made it easier than ever for customers to migrate from analog to digital with the introduction of the new monochrome PoCL camera, the XCLC130. Featuring SXGA resolution of 1,296 x 966 effective pixels, this camera offers exciting new options for a wide array of applications, including Intelligent Transportation Systems, machine vision and sports shooting.

The XCL C130 camera is equipped with several unique features, including Shading Correction, Defect Correction and Temperature Readout.

Image sensor	1/3-type progressive scan IT CCD
Image sensor (Number of effective pixels, H x V)	1,296 x 966
Cell size (H x V)	3.75 μm x 3.75 μm
Output pixels (H x V)	1,280 x 960
Output pixels (H x V, Full resolution)	1,296 x 966
Color filter	–
Frame rate	31 fps
Minimum illumination (50%)	0.5 lx (Iris: F1.4, Gain: 18 dB, Shutter: 1/30 s)
Sensitivity	F5.6 (400 lx, Gain: 0 dB)
S/N ratio	More than 50 dB
Gain	Auto, Manual: 0 dB to 18 dB
Shutter speed	2 s to 1/100,000 s
White balance	–
Readout modes	Normal, Binning (2 x 1, 1 x 2, 2 x 2), Partial scan
Readout features	Binnarization, Gamma (variable), Built-in test pattern, LUT
Synchronization	Hardware trigger, Software trigger
Trigger modes	Edge detection, Pulse width detection, Bulk Trigger, Sequential Trigger
Memory channel (Usersets)	16 channels
User memory	32 kbytes 64 bytes x 16ch
Other features	Shading correction, Defect correction, Temperature readout
Video data output	8, 10, 12-bit, digital
Digital interface	LVDS
Camera specification	PoCL, CameraLink® Version1.2
Output data clock	50 MHz (1 tap), 25 MHz (2 tap)
Digital input/output	TTL IN (x3), TTL OUT (x3)
Lens mount	C mount
Power requirements	DC 12 V ( 10.5 V to 15.0 V)
Power consumption	2.4 W (typical)
Operating temperature	23°F to 113°F (-5°C to 45°C)
Performance guarantee temperature	32°F to 104°F (0°C to 40°C)
Storage temperature	-22°F to 140°F (-30°C to 60°C)
Operating humidity	20% to 80% (no condensation)
Storage humidity	20% to 95% (no condensation)
Vibration resistance	10 G (20 Hz to 200 Hz)
Shock resistance	70 G
Dimensions (W x H x D)	1 3/16 x 1 3/16 x 1 3/16 inches (29 x 29 x 30 mm) (excluding protrusions)
Weight	2.0 oz (56 g)
Regulations	UL60950-1, FCC Class A, CSA C22.2-No.1, IC Class A Digital Device, CE: EN61326 (Class A), AS EMC: EN61326, VCCI Class A, KCC
Supplied accessories	Lens mount cap (1), Operating instructions (1)
Shading Correction	Minimizes uneven image intensity caused by lighting conditions.
Defect Correction	Automatically minimizes defective pixels directly inside the camera.
Temperature readout	Eliminates the need for a separate sensor and simplifies system configuration.
Memory Channel	Up to 16 sets of camera parameters can be stored in addition to the factory default settings.
Bulk Trigger Modes	Allows the camera to capture up to 16 images in rapid succession using a single hardware or software trigger.
Sequential Trigger Mode	Allows the camera to capture a single image using successive setups stored in the memory channel.