24-Inch Studio Monitor w/HDSDI

The JVC DT-R24L41DU Studio LCD Monitor (24"), with a 10-bit 4:4:4 real time processor and 16.7 million colors, delivers high-quality images at a resolution of up to 1920 x 1200. It offers a contrast ratio of 1000:1, brightness of 400 cd/m², and a wide viewing angle of 178 x 178° (H x V) that allows you to view the images clearly even from room corners or when the display is mounted at a height. In addition, the monitor includes dual HD/SD SDI inputs with a switched output.
 

DT-R24L41DU features include:

• 10-bit 4:4:4 real time processor
• Offers 16.7 million colors
• Delivers high-quality images at a resolution of up to 1920 x 1200
• Offers a contrast ratio of 1000:1 and brightness rating of 400 cd/m²
• Wide viewing angle of 178 x 178° (H x V) - allows you view the images clearly even from room corners or when the display is mounted at a height
• Dual HD/SD SDI inputs with a switched output
• Automatically adapts to the input resolution of the incoming video signal at an aspect ratio of 16:10
• De-interlace (IP mode) circuitry converts interlaced video, such as common analog television signals or 1080i format HDTV signals, into a non-interlaced form
• IP selection modes - Normal mode (frame complement and vertical filter), Field (field complement), and Cinema (for 24p)
• Built-in low latency circuitry ensures accurate monitoring by minimizing the time difference between the input signal and monitor image to less than 1 frame
• Desired color temperature can be set with a 3-temperature memory that comes in 9300K and 6500K modes as well as user-specified mode
• Features a wide color gamut (subset of colors) and offers a chromatic range equivalent to EBU 100%
• Gamma calibration - produces correct video images
• Audio level meter - displays channel number in each level bar and allows you to monitor the audio signals for reference level/over level, 0 dB, three set levels, and peak hold function
• 2 internally mounted speakers for monitoring of 2 audio channels of the available 12 HD/SD SDI embedded audio channels
• Rotary knob for adjusting volume levels
• Status information is displayed in the vacant area above or below the active picture area
• You can assign the monitor name (up to 10 characters) using the on-screen menu or through the RS-232C connector
• Offers features such as time code (SDI-embedded), an audio level meter (12 channels), and CRC error status
• 1:1 scan function - displays input signals in the actual format without any scaling
• 4:3 vertical display function selection - allows for full utilization of vertical screen area (1200 pixels)
• Includes video production functions like area markers and a 100%-80% adjustable safety marker (to display area outside the image)
• Aspect switch for precisely monitoring different aspect ratios in 16:9 and 4:3 modes
• Screen check - enables correct image checking by switching between R, G, and B signals
• Time code mode - allows you to view HD-SDI / SDI embedded time code on the screen and LTC (linear time code) or VITC (vertical interval time code) types of time codes are supported
• Can be set to No Sync Action by selecting from Suspend, Gray Back, and Off, when there is no input signal or during power saving mode
• Incorporates 4-way remote control system that can be selected from Make contact system, trigger Pulse system, RS-485, and RS-232C
• Cascade signal output can be achieved by converting the RS-232C system to RS-485
• Features standard 100mm VESA mounting
• Rack or shelf mounted
• Rugged metal base with 4-hole pattern provides secure installation
• Can be mounted in tabletop configuration or flush upfront with the 3-way stand
• Features a rugged metal cabinet for added durability
• Speaker grill and enforced edge design for protecting protruding volume controls and switches from accidental operation
• Concave rear design for protecting connectors