CCD & CMOS Cameras
Contact us for lowest price (800) 284-2288, (858) 565-1101,, or fax (858) 300-4193
1/2" SVGA Color Version GigE Camera

The JAI CB-040GE is a Bayer mosaic color progressive scan camera with 0.4 million pixels resolution and GigE Vision interface.

CB-040GE utilizes the Sony ICX415 CCD and outputs 60 full frames/second in continuous (free-run) mode. Higher frame rates can be achieved by using the Partial Scan or Vertical binning modes.

The unique sequencer function makes it possible to change exposure time, gain and ROI on the fly.

The programmable GPIO allows flexible configuration of inputs/outputs as well as the timer/counter function.

→ C3 Compact series
→ 1/2" Bayer mosaic color progressive scan camera
→ 782 (h) x 582 (v) active pixels
→ 8.37μm square pixels
→ 60 frames/second with full resolution
→ Partial scan and vertical binning
→ Unique sequencer function
→ Programmable GPIO
→ GigE Vision interface

Sensor 1/2" progressive scan CCD
Pixel Clock 33.75 MHz
Frame rate full frame 61.15 frames/second
Active area 6.49 (h) x 4.83 (v) mm
Cell size 8.3 (h) x 8.3 (v) micro m
Active pixels 776 (h) x 582 (v)
Color (CB-040 GE) Raw Bayer output, host-based interpolation
Read-out modes, Full 776 (h) x 582 (v) 61 fps
Read-out modes, 1/2 partial scan 776 (h) x 294 (v) 110 fps
Read-out modes, 1/4 partial scan 776 (h) x 146 (v) 186 fps
Read-out modes, 1/8 partial scan 776 (h) x 74 (v) 280 fps
Read-out modes, 2/3 partial scan 776 (h) x 390 (v) 87 fps
Read-out modes, Vertical binning (CM-040 GE only) 776 (h) x 291 (v) 111 fps
Read-out modes, Region-of-interest (ROI) User Definable. Memory read-out 
Sensitivity 1.3 Lux (On sensor, max. gain, shutter off, 50% video)
S/N ratio >50 dB(0 dB gain)
Video output GigE Vision, 8-bit or 10-bit
Auto-iris lens video output 0.7 Vp-p, enabled by internal switch 
Gain Manual -3dB to 24 dB
Synchronization Internal X-tal, External hardware trigger via GPIO; Software trigger via GigE Vision
GPIO Module, Input/output switch Configurable 14-in/9-out switch (LUT)
GPIO Module, Clock generator (one) 12-bit counter based on 25MHz clock or Pixel Clock
GPIO Module, Pulse generators (four) 20-bit counters programmable for length, start point, end point, repeat
Hardware trigger modes Continuous, Pre-Select, Pulse Width, Frame delay, Sequence (Gain, Shutter, ROI)
Electronic shutter, Pre-set shutter 1/60 to 1/10,000 in 10 steps
Electronic shutter, Programmable exposure 2L(54.874 micro s ) to 596L (16.353ms) in 1L steps
Electronic shutter, Exposure Time (Abs) micro sec - user definable. Same range as PE
Electronic shutter, Pulse Width max. 2 sec. (can be set by 100 micro s unit or Pixel Clock unit)
Control interface Register based GigE Vision/GenICam compliant 
Functions controlled via GigE Vision interface Shutter, Gain, Black level, Trigger mode, Readout mode, GPIO setup, ROI (GenICam mandatory functions) 
GigE Vision streaming control Packet size (1428 to 4040bytes), Delayed (frame) readout, Inter-packet delay,
Indicators on rear panel Power / Hardware trigger, GigE link, GigE activity
Operating Temperature -5°C to 45°C
Humidity (operation) 20 - 80% non-condensing
Storage temp./humidity -25°C to 60°C / 20 to 80%
Vibration 10G (20Hz to 200 Hz XYZ)
Shock 70G
Regulations CE (EN 61000-6-2, EN-61000-6-3), FCC part 15 class B, RoHS/WEEE
Power 12V DC /-10%. 3.6W
Lens mount C-mount
Dimensions (H x W x L) 29 x 44 x 75 mm
Weight 125 g


facebook.png twitter.png linkedin.png youtube.png
Prices and specifications subject to change without notice.