CCD & CMOS Cameras
Contact us for lowest price (800) 284-2288, (858) 565-1101,, or fax (858) 300-4193
1/1.8" Monochrome GigE Camera

The JAI CM-200GE is a monochrome progressive scan camera with 2 million pixels resolution and GigE Vision interface.  It utilizes the Sony ICX274 CCD and outputs 25 full frames/second in continuous (free-run) mode and up to 24 frames/second in external trigger modes. Higher frame rates can be achieved by using the Partial Scan or Vertical binning modes.

CM-200GE features-

→ C3 Compact series
→ 1/1.8" monochrome progressive scan CCD
→ 1620 (h) x 1236 (v) active pixels
→ 4.4 μm square pixels
→ 25 frames/second with full resolution
→ Partial scan and vertical binning
→ Unique sequencer function
→ Programmable GPIO
→ GigE Vision interface

Sensor 1/1.8" CCD
Pixel Clock 65 MHz
Frame rate full frame 25 frames/second
Active area 7.13 (h) x 5.37 (v) mm
Cell size 4.4 x 4.4 micro m
Active pixels 1624 (h) x 1236 (v)
Color (CB-200 GE) Raw Bayer output, host-based interpolation 
Read-out modes, Full 1624 (h) x 1236 (v) 25 fps
Read-out modes, 1/2 partial scan 1624 (h) x 616 (v) 43.82 fps
Read-out modes, 1/4 partial scan 1624 (h) x 308 (v) 69.59 fps
Read-out modes, 1/8 partial scan 1624 (h) x 156 (v) 97.96 fps
Read-out modes, 2/3 partial scan 1624 (h) x 824 (v) 35.07 fps
Read-out modes, Region-of-interest (ROI) User Definable. Memory read-out
Sensitivity (CM-200 GE) 0.21 Lux (On sensor, max. gain, shutter off, 50% video) 
S/N ratio >50 dB(0 dB gain)
Video output GigE Vision, 8-bit or 10-bit
Auto-iris lens video output 0.7 Vp-p, enabled by internal switch 
Gain Manual -3dB to 24 dB
Synchronization Internal X-tal, External hardware trigger via GPIO; Software trigger via GigE Vision
GPIO Module, Input/output switch Configurable 14-in/9-out switch (LUT)
GPIO Module, Clock generator (one) 12-bit counter based on 25MHz clock or Pixel Clock
GPIO Module, Pulse generators (four) 20-bit counters programmable for length, start point, stop point, repeat
Hardware trigger modes Continuous, Pre-Select, Pulse Width, Sequence (Gain, Shutter, ROI), Delayed Readout
Electronic shutter, Pre-set shutter 1/25 to 1/10,000 in 10 steps
Electronic shutter, Programmable exposure 2L to 1251L (64 micro m to 40ms)
Electronic shutter, Exposure Time (Abs) micro sec - user definable. Same range as PE
Electronic shutter, Pulse Width 32 micro s to 2 sec.
Control interface Register based GigE, Vision/GenICam compliant
Functions controlled via GigE Vision interface Shutter, Gain, Black level, Trigger mode, Readout mode, GPIO setup, ROI (GenICam mandatory functions) 
GigE Vision streaming control Packet size: (1428 to 4040bytes), Delayed (frame) readout, Inter-packet delay,
Indicators on rear panel Power / Hardware trigger, GigE link, GigE activity
Operating Temperature -5°C to 45°C
Humidity (operation) 20 - 90% non-condensing
Storage temp./humidity -25°C to 60°C / 20 to 90%
Vibration 10G (20Hz to 200 Hz XYZ)
Shock 70G
Regulations CE (EN 61000-6-2, EN-61000-6-3), FCC part 15 class B, RoHS/WEEE
Power 12-24V DC /-10%. 4.2W (@12V)
Lens mount C-mount
Dimensions (H x W x L) 29 x 44 x 75 mm
Weight 125 g


facebook.png twitter.png googleplus.png linkedin.png youtube.png pinterest.png
Prices and specifications subject to change without notice.