CCD & CMOS Cameras
Contact us for lowest price (800) 284-2288, (858) 565-1101,, or fax (858) 300-4193
1/2" EIA Monochrome Interlaced Camera - NIR

The JAI TM-775NIR provides users with a 1/2" format interlaced camera with sensitivity equal to or greater than many 2/3" cameras. The Sony ICX428AL CCD imager offers superior light gathering ability due to its advanced micro lens technology and its extended sensitivity in the near-infrared (NIR) portion of the spectrum.

An integrated lens controller enables users to remotely operate motorized lenses, pan & tilt heads, or any 3 external control channels. The single 15-pin connector is used for power, camera control, and video output, making installation clean and simple. All camera features are controllable via RS-232 commands over this single interface cable.

Designed with small size and ruggedness in mind, the TM-775NIR is suitable for a wide range of industrial, defense, and homeland security applications. Advanced options include Auto Level Control (ALC) to automatically adjust gain and shutter settings during changing light conditions; conformal coating; pixel blemish compensation; and extended temperature capability for operating in temperatures from -40 degrees C to 65 degrees C.

→ 1/2" interlaced camera with extended NIR sensitivity
→ 756(H) x 494(V) resolution @ 30 fps (EIA)
→ Micro size, rugged construction
→ Shutter from 1/60 to 1/100,000 sec.
→ Integrated 3-axis controller for remote adjustment of zoom, focus, iris, pan, tilt, etc.
→ Single 15 D-sub connector for power, video, and RS-232 control
→ Mount-positionable on all four sides
→ Advanced options available

Sensor 1/2" CCD NIR interlace ICX428AL
Active pixels 756 (H) x 494 (V)
Active area 6.35 x 4.84 mm
Cell size 8.4 μm x 9.8 μm
Scanning 525 lines / 60 Hz
Synchronization Internal/external auto switch
HD/VD 4.0 Vp-p impedance 10K Ω
VD = interlace/non-interlace
HD = 15.73 kHz ± 5%
TV resolution 570 (H) x 350 (V)
S/N ratio >53 dB min. (AGC Off)
Sensitivity 0.10 lux (f=1.4)
High sensitivity option Up to 100X increase in low-light sensitivity (reduced resolution)
Video output 1.0 Vp-p composite video, 75 Ω
Gamma 0.45 / 1.0 (RS-232 controlled)
1.0 Factory Default
Lens mount C-mount (adjustable)
Power requirement 12V DC, 150 mA typical at 25° C
Operating temperature -10° C to 50° C
Storage temperature -50° C to 70° C
Vibration 7 Grms (20 Hz to 2000 Hz) Random
Shock 70 G, 11 ms, half-sine
Dimensions (H x W x L) 32 x 42 x 48.48 mm with mechanical enclosure
29.3 x 39.4 x 35.66 mm without mechanical enclosure
Weight 113 g with mechanical enclosure
69 g without mechanical enclosure


facebook.png twitter.png linkedin.png youtube.png
Prices and specifications subject to change without notice.