kp-fkp-fr500.jpg View Larger Image (in new window)

Hitachi : KP-FKP-FR500SCL

By: Hitachi
Industrial Video System & Broadcast
Contact us for lowest price (800) 284-2288, (858) 565-1101,, or fax (858) 300-4193
2/3-inch Progressive Scan CCD Color Camera - Mini CL
The Hitachi KP-FKP-FR500SCL is a CameraLink output system progressive scan RAW data output color CCD camera with a 2/3-inch size CCD which adopted the RGB primary color filter and a full frame shutter.

The image of 2456 (H) x 2058 (V) is output in RAW data at 16 frames per second. The square format picture elements provide suitability for image processing applications.
Ultra Compact Cube Size Camera
2/3" Format Progressive Scan CCD
Primary RGB Color Filter
2456 x 2058 Effective Pixels
Raw Color Output (unprocessed)
2000 TV lines of Resolution
16 Frames / Second
CameraLink Output, Dual Mini SCL Connector
SCL or PCL output
Selectable 8, 10 or 12 bits / pixel
Frame-on-Demand Mode
RoHS Compliant
Imaging device Interline CCD sensor
Total number of pixels EIA: 811 (H) x 508 (V)
CCIR: 795 (H) x 596 (V)
Pixel pitch EIA: 6.35 (H) x 7.4 (V) µm
CCIR: 6.5 (H) x 6.25 (V) µm
Number of effective pixels EIA: 768 (H) x 494 (V)
CCIR: 752 (H) x 582 (V)
Imaging area EIA: 4.88 mm x 3.66 mm (1/2-inch)
CCIR: 4.89 mm x 3.64 mm (1/2-inch)
Signal system Conforming to EIA/CCIR signal format (at normal operation)
Lens mounting C mount
Flange focal distance 17.526 mm (not an adjustable)
Horizontal scanning frequency EIA: 15.734 kHz
CCIR: 15.625 kHz
Vertical scanning frequency EIA: 59.94 Hz
CCIR: 50 Hz
Synchronization Automatic changeover of internal/external synchronization
Internal sync scanning 2:1 interlaced, 525 horizontal lines (CCIR: 625 lines)
fv = 2 fH/525 (CCIR: lines)
External sync input HD/VD, 2 to 6 Vp-p, negative polarity
Input impedance: 1 kΩ, Frequency deviation: ±1%
Number of horizontal lines 2:1 interlaced
Allowable for external synchronization EIA: 521 to 2047 lines/2FLD, 1FLD: (61 to 15Hz)
CCIR: 621 to 2047 lines/2FLD, 1FLD: (51 to 15Hz)
EIA: 260 to 1023 lines/2FLD, 1FLD: (61 to 15Hz)
CCIR: 310 to 1023 lines/2FLD, 1FLD: (51 to 15Hz)
Video output 1.0 Vp-p 75Ω unbalanced
Video component: 0.7 Vp-p
Sync component: 0.3 Vp-p negative polarity
Horizontal/vertical resolution EIA: 570 TV lines (H)/485 TV lines (V)
CCIR: 560 TV lines (H)/575 TV lines (V)
Sensitivity Under illumination of 400 lx, F8, 3200K
Minimum illumination 0.3lx, F1.4 AGC: On, Gamma:On, without IR filter
SN ratio 56 dB
Electronic shutter 1/10000, 1/4000, 1/2000, 1/1000, 1/500, 1/250, 1/125, 1/120 (CCIR), 1/100 (EIA) sec
In OFF state: Normal exposure
Selectable external switch mode
Intergration mode Field/frame integration mode
Selectable by external switch setting
Gamma correction Gamma = 1.0 or correction
Selectable by internal switch
AGC Pixed gain or AGC, Selectable by internal switch setting
Field-on-demand function Turned on/off with internal switch
Restart/reset function Turned on/off with chip component switching
Power requirement 12V DC ±1 V, 180 mA approx
Ambient temperature and humidity Operating: -10 to 60°C, Less than 90% RH
Storage: -20 to 60°C, Less than 70% RH
Vibration resistance 68.6 m/s max
(10 to 60 Hz, amplitude: constant at 0.98mm)
(60 to 200 Hz, amplitude: variable)
(10 to 200 Hz, sweeping for one minute, Each of X, Y and Z directions for 30 minutes)
Dimensions and mass 44 (W) x 29 (H) x 72 (D) mm
120g approx

Imaging device 2/3-inch progressive scan interline CCD
Total pixels 2536 (H) x 2068 (V)
Effective pixels 2456 (H) x 2058 (V)
Pixel size 3.45 µm (H) x 3.45 µm (V) (square lattice)
Color filter RGB primary color mosaic filter
Scanning area 8.47 mm (H) x 7.10 mm (V)
Scanning system Progressive
Aspect ratio 5:4
Frame rate 16 frames per second (full pixel readout)
Horizontal drive frequency 64.0000 MHz
Horizontal scanning frequency 33.264 kHz
Vertical scanning frequency 16.00 Hz
Sync system Internal
Lens mount C mount
Flange focal distance 17.526 mm
Video output Digital output (CameraLink)
Base configuration: 64.0000 MHz x 2TAP
Medium configuration: 32.0000 MHz x 4TAP
Maximum cable length: 10m
Output image size: 2456(H) x 2058(V) (full pixel readout)
Sensitivity 2000lx, F8, 3200K
Minimum illumination 15lx (F1.4 GAIN MAX)
Signal noise to ratio 48dB
Electric shutter OFF 1/16, 1/60, 1/100, 1/250, 1/1000, 1/2000, 1/10000, 1/50000 second.
OFF is normal exposure (frame rate) or changeable by variable shutter (Minimum 1/100000 second)
Gamma γ = 1
Frame on demand Mode: (A) Fixed shutter (8 steps or variable)
(B) ONE trigger mode
(C) VD reset mode
Trigger input: CameraLink (CC1) or DCIN/SYNC connector
Partial scan Selectable start position and width of picture grabbing in 1H step.
Power supply voltage 12 ± 1 VDC
Current consumption Approx. 310 mA (Approx. 3.7W)
*MAX partial scan 1H: Approx.390 mA (Approx. 4.7W)
Ambient Performance: 0 to 40℃ ( 32 to 104 F), less than 90 % RH
Operation: -10 to 50℃ ( 14 to 122 F), less than 90 % RH
Storage: -20 to 60℃ (-4 to 140 F), less than 70 % RH (without dew condensation)
Vibration endurance 10 to 55 Hz (2.37 to 71.7 m/s2), sweep: 1 min XYZ 30min
Shock endurance 490.3 m/s2 (Drop test, once each top, bottom, left and right)
External dimensions 44 (W) x 44 (H) x 41 (D) mm (Not including mount protrusions)
Mass Approx. 110 g

facebook.png twitter.png linkedin.png youtube.png
Prices and specifications subject to change without notice.