Contact us for lowest price (800) 284-2288, (858) 565-1101, email@example.com
, or fax (858) 300-4193
Etherstretch™ IP Cameras Over UTP Extender w/Weatherproof Transmitter & Surge Suppressor
The Nitek Etherstretch™ EL1500UWS Outdoor IP cameras network extender-PoE Inserter with Surge Suppression is another of the IP Video Transmission Solutions from NITEK. The System includes a receiver, transmitter, surge suppression unit and a NEMA4X rated enclosure to house the transmitter and surge units. The system transmits IP cameras over network category cables and can quickly turn any ordinary 4 pair category cable into a high speed network communication & PoE path.
When operating over UTP category cable, the network extender system can operate for distances of up to 600 meters (1,940 feet). The EL1500UWS coax ethernet extender system consists of a weatherproof enclosure which houses the transmitter and surge unit and a standard receiver. The system requires very little installation time & absolutely no set up or configuration. The The EL1500U ethernet extender transmitter and receiver are transparent to the network and have no IP or MAC addressing. Simply connect your network devices to the network ports of the transmitter and receiver along with existing cabling and the system begins communicating. LED indicators show the status of network communication and PoE power.
When connected to a PoE switch, power from the switch is used as the power source for the connected EL1500UWS receiver. In applications where network switches are not PoE capable, an optional power Inserter (IP1054 sold separately) can be used to insert power to the EL1500UWS receiver. The power is sent from the receiver over the coax to the transmitter. The transmitter uses PoE as its power source and powers the connected PoE network device as well. The EL1500CWS coax network extender system extends network communications to overcome cable distance limitations offering connections to devices in locations traditional networking does not allow.
→ NEMA4X Rated Enclosure to House Transmitter and Surge Suppressor
→ Includes a NITEK IPPWR1 Surge Suppressor Unit
→ Transmits up to distances of 600 meters ⁄ 1,960 feet
→ Supports PoE and network communications
→ Supports any network device, including IP cameras
→ Fully transparent to the network
→ Built-in surge protection
→ Easy to install, no set up required
→ No MAC or IP addressing required
→ LED indicators for network signals, link status and power
→ Optional power supply can insert POE power for non-POE switches
| Receiver Unit Size|| 1.1"H x 1.6"W x 5.1"D|
| Enclosure Size|| 2.165"H x 5.74"W x 9.92"D|
| Power Requirements|| PoE or IP1054 PoE Inserter (48vdc @ 15.4watts)|
| Ethernet Connection||  Auto Configuring 10 ⁄ 100 RJ45 port|
| EtherStretch Link Connection||  RJ45 Port|
| LED Indicators|| Link Status, Power, PoE Out, 10Mb or 100mb|
| Shipping Weight|| 2 lbs.|
| Mounting|| Two 3⁄8" mounting slots|
| Operating Temperature|| -15 degrees to 75 degrees C / 0 degrees to 167 degrees F|
| Humidity|| Up to 85% non-condensing|
| Surge Suppression Unit|| Nitek Model IPPWR1|
© 1996 - 2016 | All Rights Reserved
Audio Video Supply Inc.
4575 Ruffner St
San Diego, CA 92111
Prices and specifications subject to change without notice.