By: Nitek
Video Transmission Solutions
Contact us for lowest price (800) 284-2288, (858) 565-1101,, or fax (858) 300-4193
Etherstretch™ IP Cameras Over 2 Wire UTP Extender w/Weatherproof Transmitter
The Nitek EL1551UW IP video network extender system is another of the Etherstretch™ IP Video Transmission Solutions from NITEK. The System includes a receiver, transmitter and a NEMA4X rated enclosure to house the transmitter unit. The system extends 100Mbps of Ethernet communication over a single pair of communication cables up to 1,500 feet (460 meters)turning any ordinary pair of wires, such as UTP or any 2 conductor cable into a high speed network communication path.

The EL1551UW weatherproof transmitter enclosure makes it possible to take the network outdoors to devices located in hostile environments. The EL1551UW Netork Extender requires very little installation time & absolutely no set up or configuration. The EL1551UW network extender transmitter and receiver are transparent to the network and have no IP or MAC addressing. Simply connect your network devices to the network ports of the transmitter and receiver along with existing cabling and the system begins communicating. LED indicators show the status of network communication and PoE power.

The EL1551UW system is ideal for upgrading analog UTP video balun systems to IP systems without needing to replace or even disturb the existing cable infrastructure. Power is provided to the ET1551UW transmitter from the ER1551UW receiver unit. LED indicators show the status and speed of network communications.
NEMA4X Rated Enclosure to House Transmitter
Transmits up to distances of 500 meters ⁄ 1,640 feet
Supports PoE and network communications
Supports any network device, including IP cameras
Fully transparent to the network
Built-in surge protection
Easy to install, no set up required
No MAC or IP addressing required
LED indicators for network signals, link status and power
Optional power supply can insert POE power for non-POE switches
Unit Size 1.1"H x 1.6"W x 4.93"D
Enclosure Size 2.25"H x 4.76"W x 7.125"D
Power Requirements PoE or IP1054 PoE Inserter (48vdc @ 15.4watts)
Ethernet Connection [1] Auto Configuring 10 ⁄ 100 RJ45 port
EtherStretch Link Connection [1] Coaxial BNC Connector
LED Indicators Link Status, Power, PoE Out, 10Mb or 100mb
Shipping Weight 5 lbs.
Mounting Two 3⁄8" mounting slots
Operating Temperature 0 - 140 F Fahrenheit
Humidity Up to 85% non-condensing

facebook.png twitter.png googleplus.png linkedin.png youtube.png pinterest.png
Prices and specifications subject to change without notice.