By: Nitek
Video Transmission Solutions
Contact us for lowest price (800) 284-2288, (858) 565-1101,, or fax (858) 300-4193
Etherstretch™ Ethernet Over Coax Extender Weatherproof Transmitter Unit & Surge Suppressor
The Nitek Etherstretch™ ET1500CWS Outdoor Ethernet over Coax network extender-PoE Inserter with Surge Suppression is another of the IP Video Transmission Solutions from NITEK. The System includes a transmitter, surge suppression unit and a NEMA4X rated enclosure to house the transmitter and surge units. Operates with ER8500C or ER16500C Receiver Unit (purchase separately). Transmits IP cameras over coax and can quickly turn any ordinary RG59U coaxial cable into a high speed network communication & PoE path.

When operating over RG59U coaxial cable, the ethernet overcoax network extender system can operate for distances of up to 500 meters (1,640 feet). The ET1500CWS coax ethernet extender transmitter consists of a weatherproof enclosure which houses the transmitter and IPCOAX1 Surge Suppressor. Requires very little installation time & absolutely no set up or configuration. The The ET1500CW ethernet over coax network extender transmitter is transparent to the network and has no IP or MAC addressing. Simply connect your network devices to the network ports of the transmitter and receiver devices along with existing cabling and the system begins communicating. LED indicators show the status of network communication and PoE power.

When connected to a PoE switch, power from the switch is used as the power source for the connected ET1500CWS transmitter. In applications where network switches are not PoE capable, an optional power Inserter (IP1054 sold separately) can be used to insert power to the ET1500CWS transmitter. The power is sent from the receiver over the coax to the transmitter. The transmitter uses PoE as its power source and powers the connected PoE network device as well. The ET1500CWS coax network extender transmitter extends network communications to overcome cable distance limitations offering connections to devices in locations traditional networking does not allow.
NEMA4X Rated Enclosure to House Transmitter and Surge Suppressor
Includes a NITEK IPCOAX1 Surge Suppressor Unit
Transmits up to distances of 500 meters ⁄ 1,640 feet
Supports PoE and network communications
Supports any network device, including IP cameras
Fully transparent to the network
Built-in surge protection
Easy to install, no set up required
No MAC or IP addressing required
LED indicators for network signals, link status and power
Optional power supply can insert POE power for non-POE switches
Receiver Unit Size 1.1"H x 1.6"W x 5.1"D
Enclosure Size 2.165"H x 5.74"W x 9.92"D
Power Requirements PoE or IP1054 PoE Inserter (48vdc @ 15.4watts)
Ethernet Connection [1] Auto Configuring 10 ⁄ 100 RJ45 port
EtherStretch Link Connection [1] Coaxial BNC Connector
LED Indicators Link Status, Power, PoE Out, 10Mb or 100mb
Shipping Weight 2 lbs.
Mounting Two 3⁄8" mounting slots
Operating Temperature 0 - 140 F Fahrenheit
Humidity Up to 85% non-condensing
Surge Suppression Unit Nitek Model IPCOAX1

facebook.png twitter.png linkedin.png youtube.png
Prices and specifications subject to change without notice.