Call Now: 1-800-284-2288 |
(discontinued)4K HDMI® Input Card w/Downmixing for DM® Switchers |
|
|
|
|
This product has been discontinued. Recommended replacement DMC-4K-HD-DSP-HDCP2
The DMC-4K-HD-DSP is an input card designed for use with any card-based Crestron® DigitalMedia™ Switcher. It provides one HDMI® input, with associated HDMI pass-through and analog audio outputs. A USB HID port is also provided. The HDMI input handles Full HD 1080p, Ultra HD, 2K, and 4K video signals with support for HDCP, Deep Color, 3D, and high-bitrate 7.1 audio. The HDMI input can also handle DVI and DisplayPort Multimode signals using an appropriate adapter or interface cable.[1]
The DMC-4K-HD-DSP provides all of the features of the DMC-4K-HD with the addition of downmixing to enable the simultaneous distribution of multichannel 7.1 surround sound and 2-channel stereo signals. It is recommended for use with surround sound sources to allow the original multichannel signal to be distributed to rooms with surround sound systems, while simultaneously distributing a 2-channel downmix signal to stereo-only rooms and devices.
DMC-4K-HD-DSP features include:
- Modular input card for a DM-MD8X8, DM-MD16X16, or DM-MD32X32 switcher
- Provides a single 4K HDMI® input
- Handles video resolutions up to 4K and Ultra HD
- Handles 3D video and Deep Color
- Handles Dolby® TrueHD, DTS-HD®, and uncompressed 7.1 linear PCM audio
- HDCP compliant
- Includes an HDMI output for pass-through of the input signal
- Includes a stereo analog line-level audio output with volume control
- Allows extraction of stereo 2-channel audio signals
- Built-in downmixing enables simultaneous distribution of multichannel surround sound and 2-channel stereo audio signals
- Enables device control via CEC
- Enables USB HID signal extension for a local computer
- Compatible with Crestron USB over Ethernet Extenders [2]
- Occupies a single DM switcher input card slot
- Provides an HDMI problem solving solution using the optional DMCI card interface [3]
| Video | |||||
| Input Signal Types | HDMI®, DVI[1], DisplayPort Multimode[1] | ||||
| Output Signal Types | HDMI or DVI[1] to switcher backplane and HDMI OUT connector | ||||
| Formats | HDMI w/Deep Color, 3D, & 4K; DVI; HDCP content protection support | ||||
| Maximum Resolutions | Scan Type | Maximum Resolution | Frame Rate | Color Sampling | |
| Progressive | 4096x2160 4K DCI | Up to 24 Hz | 4:4:4 | ||
| Progressive | 3840x2160 Ultra HD | Up to 30 Hz | 4:4:4 | ||
| Progressive | 2560x1600 WQXGA | Up to 60 Hz | 4:4:4 | ||
| Progressive | 4096x2160 4K DCI | Up to 60 Hz | 4:2:0 [5] | ||
| Progressive | 3840x2160 Ultra HD | Up to 60 Hz | 4:2:0 [5] | ||
| Interlaced | 1920x1080 1080i30 | Up to 30 Hz | 4:4:4 | ||
| NOTE: Common resolutions are shown; other custom resolutions are supported at pixel clock rates up to 300 MHz | |||||
| Audio | |||||
| Input Signal Types | HDMI, DisplayPort Multimode[1] | ||||
| Output Signal Types | HDMI (multichannel) to switcher backplane and HDMI OUT connector, analog stereo 2-channel[2], allows audio breakaway | ||||
| Digital Formats | Dolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby® TrueHD, DTS®, DTS-ES, DTS 96/24, DTS-HD High Res, DTS-HD Master Audio™, up to 8ch PCM | ||||
| Analog Format | Stereo 2-channel | ||||
| Digital-To-Analog Conversion | 24-bit 48 kHz | ||||
| Performance (analog) | Frequency Response: 20Hz to 20kHz ±0.5dB; S/N Ratio: >95dB, 20Hz to 20kHz A-weighted; THD+N: b><0.005% @ 1kHz; Stereo Separation: >90dB |
||||
| Volume Gain Range (analog) | -80dB to 0dB | ||||
| Communications | |||||
| HDMI | HDCP, EDID, CEC | ||||
| USB | Supports signal extension of USB HID class devices, expandable to support virtually any USB 1.1 or 2.0 device using Crestron USB-EXT-DM USB over Ethernet Extenders[3] | ||||
| Connectors | |||||
| HDMI OUT | (1) 19-pin Type A HDMI female; HDMI digital video/audio output; Also supports DVI[1] |
||||
| HDMI IN | (1) 19-pin Type A HDMI female; HDMI digital video/audio input; Also supports DVI and DisplayPort Multimode[1] |
||||
| USB HID | (1) USB Type B female; USB device port for connection to the USB host interface of a computer or other USB HID-compliant host |
||||
| AUDIO OUT | (2) RCA female; Unbalanced stereo line-level audio output[2]; Output Impedance: 100 Ohms nominal; Maximum Output Level: 2 Vrms |
||||
| Construction | |||||
| Plug-in card, occupies (1) DM switcher input card slot, includes metal faceplate w/black finish | |||||
| Weight | |||||
| 8.0 oz (227 g) | |||||
| dmc-4k-hd-dsp.pdf | Datasheet |
Call Now: 1-800-284-2288 |
|||||
Email Us: sales@avsupply |
|||||
|
