Search

2MP High Speed CMOS 340fps, Camera Link Camera, Monochrome (Near-IR Version)

Sentech - STC-CMB2MCL-NIR View Larger Image (in new window)

Sentech : STC-CMB2MCL-NIR

Contact us for lowest price (800) 284-2288 , (858) 565-1101 Call Now [email protected]

The STC-CMB2MCL is part of the high-speed, CMOS Camera Link Camera series. This monochrome camera uses the C-MOSIS 2 Megapixel sensor which outputs full resolution at 340 fps. The STC-CMB2MCL also provides full triggering capabilities, a configurable AOI (Area of Interest) and comes in a small package of 50 (W) x 50 (H) x 40.5 (D) mm.

  • High Performance Machine Vision Camera w/ Full Triggering
  • 2/3" CMOS Sensor, High Speed Data Rate
  • Fully Configurable AOI (Area of Interest)

Model No

STC-CMB2MCL

Imager

2/3" 2 Megapixel monochrome CMOS (CMOSIS: CMV2000)

Active Picture Element

2048 (H) x 1088 (V)

Chip Size

11.264 (H) x 5.984 (V) mm

Cell Size

5.5 (H) x 5.5 (V) μm

Scanning System

Progressive

Scanning Method

Full scanning, Variable partial scanning, Binning scanning, Binning variable partial scanning

Vertical Frequency (Frame Rate)

8-bit 10TAP: 340 Hz / 10-bit MEDIUM: 150 Hz (8-bit FULL / 8-bit MEDIUM / 8-bit BASE / 10-bit BASE is selectable via communication)

Horizontal Frequency

8-bit 10TAP: 372 kHz / 10-bit MEDIUM: 164 kHz

Pixel Frequency

8-bit 10TAP: 48 MHz / 10-bit MEDIUM: 21.25 MHz

Noise Level

≤ 3 Digit (Gain 0 dB)

Sync System

Internal

Video Output

-

- @ 8Bit Output

10TAP / FULL / MEDIUM / BASE configuration

- @ 10Bit Output

MEDIUM / BASE configuration

Shutter Speed

OFF, 45 seconds to 1/372,093 seconds (Variable at line)

Gain

1x to 4x

Gamma

1.0

Power

-

- Input Voltage

12 Vdc ± 10%

- Consumption

Less than 4.5 W

Trigger Mode

Edge preset trigger (V-reset, Non-reset); Pulse width trigger (V-reset, Non-reset)

Communication

RS232 via Camera Link connector

Dimensions

50 (W) x 50 (H) x 40.5 (D) mm (Excluding the connector)

Optical Filter

No IR cut filter

Material

Aluminum (AC)

Lens Mount

C mount

Interface Connector

Camera Link connector: SDR mini-connector x 2; Power/IO connector: HR10A-7R-6PB (Hirose) or equivalent

Weight

Approximately 140 g

Operating Temperature

-5 to 40 deg. C

Storage Temperature

-30 to 65 deg. C

Vibration

20 Hz to 200 Hz to 20 Hz (5 min. cycle), acceleration 10G, 3 directions 30 min. each

Shock

Acceleration 70G, half amplitude 6 ms, 3 directions 3 times each

Standard Compliancy

EMS: EN61000-6-2, EMI: EN55011 (Class B)

RoHS

RoHS Compliant



facebook.png twitter.png googleplus.png linkedin.png youtube.png
Prices and specifications subject to change without notice.