stc-sc500poe.jpg View Larger Image (in new window)

Sentech : STC-SC500POE

By: Sentech
Industrial, USB, & Medical Cameras
Contact us for lowest price (800) 284-2288, (858) 565-1101,, or fax (858) 300-4193
2/3" QSXGA (2448 x 2058), 15 fps, 5.0MP, Color GigE camera, w/ IR cut filter, w/ POE

The STC-SC500POE is part of Sentech's Brand New Power over Ethernet GigE camera series. It features a 2/3" color UXGA sensor, 15fps and communication over a 6 pin Hirose or Ethernet connector. The STC-SC500POE boasts a compact 35(w) x 35(H) x 55.9 (D) mm size, a user-programmable Area of Interest (AOI) and a Gamma Table that can be imported. This camera meets all industry standards for GigE Vision® and GenICam™, and is compatible with all standard industry drivers. The GigE PoE series is available now at an extremely low cost.

STC-SC500POE features include:

  • User Programmable AOI
  • Power Over Ethernet
  • 5.0 Megapixel Resolution with 15 fps


2/3" interline QSXGA color progressive CCD: ICX625AQ

Total Picture Element

2536 (H) x 2068 (V)

Active Picture Element

QSXGA: 2448 (H) x 2058 (V)

Cell Size

3.45 (H) x 3.45 (V) µm

Scanning System


Vertical Frequency (Frame Rate)

15.18586 Hz at full resolution 0.48175 to 60.71422 Hz adjustable via the communication (Frame rate depends on the AOI setting.) Maximum frame rate (60.71422 Hz) is when vertical resolution AOI setting is 128.

Horizontal Frequency

31.1284 kHz

Pixel Frequency

81.8182 MHz

Noise Level


- @ 8Bit Output

≤ 4 Digit (Gain 0 dB)

- @ 10Bit Output

≤ 15 Digit (Gain 0 dB)

- @ 12Bit Output

≤ 60 Digit (Gain 0 dB)

Minimum Scene Illumination

TBD Lux at F1.2, 15Hz

Sync System


Video Output

Digital 8, 10 or 12 bit Raw data or RGB 8 bit


PoE : IEEE802.3af CLASS2 (1000BASE-T)


GigE Vision® 1.2 and GenICam™ 2.0 compliant

Exposure Time

Preset continuous mode: 10 useconds to 16,777,215 useconds Preset trigger mode: 10 useconds to 16,777,215 useconds Pulse width mode: 10 useconds to Unlimited




0 to 18.309 dB


Gamma 1.0 (Factory default) or uploadable gamma table

AOI (Area of Interest) Function

Variable AOI setting via the communication

Smear Reduction

Selectable ON/OFF via the communication

Color Interpolation

Available on RGB Output

White Balance

Auto, Manual, Push to Set White Balance are available on both raw data and RGB outputs

Operation Mode

Edge preset trigger, Pulse width trigger (unlimited long exposure)


UART communication through Ethernet port


One opt isolated input and two open collector outputs



- Input Voltage

+10.8 to +26.4 Vdc via power-I/O connector or Power over Ethernet (Power-I/O connector power supply is prioritized.)

- Consumption

12V: 4.1W / 3.5W, PoE: 4.5W / 3.8W


35 (W) x 35 (H) x 55.9(D) mm excluding connectors

Optical Filter

IR Cut Filter on

Optical Center Accuracy

Positional accuracy in H and V directions: +/- 0.3 mm Rotational accuracy of H and V: +/- 1.5 deg.


Aluminum (AC)

Lens Mount

C mount


RJ45 connector; Power/IO connector: HR10A-10R-6PB (Hirose) or equivalent

Camera Mount Screws

Two 1/4” Tripod screw holes: (One on each top and bottom plate), Twelve M4 screws holes: (Four on each top and bottom plate, two on each side plate)


Approx. 130

Operating Temperature


- Minimum

Environmental Temperature -5⁰C

- Maximum

Camera housing temperature (top plate) shall not exceed 65 deg. C (This corresponds to an environmental temperature of approximately 30 deg. C)

Storage Temperature

Environmental Temperature: -30⁰C to 65⁰C


20Hz to 200Hz to 20Hz (5min./cycle), acceleration 10G, 3 directions 30 min. each


Acceleration 38G, half amplitude 6ms, 3 directions 3 times each

Standard Compliancy

EMS: EN61000-6-2, EMI: EN55011


RoHS Compliant

facebook.png twitter.png googleplus.png linkedin.png youtube.png pinterest.png
Prices and specifications subject to change without notice.