ndn-498v03-21p.jpg View Larger Image (in new window)

Bosch : NDN-498V03-22IP

By: Bosch
Extreme CCTV Telex RTX Cameras DVRs & Monitors
Contact us for lowest price (800) 284-2288, (858) 565-1101,, or fax (858) 300-4193

The Bosch NDN-498V03-21P FlexiDome2X Day/Night IP Camera is a vandal-resistant, network dome camera suitable for day & night operation, and features a varifocal lens. With a 1/3" progressive scan CCD, the camera unit produces motion blur-free video in daylight whereas the 2.8-10mm zoom lens takes care of varied area of coverage. 20-bit digital signal and image processing augments this CCTV camera's ability by revealing details in video image


Available Configurations Include:

NDN-498V03-22IP  IP FLEXIDOME, 2X DAY/NIGHT, 1/3-INCH, 2.8-10MM, H.264, NTSC, POE, IVA factory installed, RECESSED MT, SD CARD SLOT


NDN-498V03-22IPS  P FLEXIDOME, 2X DAY/NIGHT, 1/3-INCH, 2.8-10MM, H.264, NTSC, POE, IVA factory installed, SURFACE MT, SD CARD SLOT

NDN-498V03-21P features include:

  • Vandal-resistant, network dome camera suitable for day & night operation
  • 1/3" progressive scan CCD offers reduced motion blur
  • 2.8-10mm varifocal lens for variable field of coverage
  • 20-bit digital signal and image processing reveal details in video image
  • Automatically switches modes for day/night operation
  • NightSense feature along with SensUp dynamic increases the FlexiDome2X Day/Night IP camera's sensitivity to view in up to 0.0099 lux in monochrome
  • 2X-Dynamic engine reproduces images with wide dynamic range
  • SmartBLC feature improves backlit images
  • Offers Autoblack feature for low-contrast scenes
  • Vandal-resistant cast aluminum casing with polycarbonate dome and hardened inner liner withstand up to 120lb (55kg) force
  • Complies with IP 66 (NEMA-4X) water resistance standards enabling outdoor use
  • Programmable private masking to mask up to four different parts of a scene
  • Provides tri-stream video (two H.264 video streams along with one M-JPEG stream simultaneously)
  • Provides M-JPEG video stream integration with JPEG or M-JPEG-compatible video management systems
  • Offers six pre-programmed operating modes for typical applications along with manual full programming capability to optimize the mode for custom requirements
  • Integrates basic video content analysis features via Motion+ video analysis system
  • Incorporates a motion analysis algorithm which provides object size filtering and advanced tamper detection capabilities
  • Built-in video motion detection and additional processing power for optional video content analysis systems
  • Configurable either over IP or by using on-body control buttons
  • Offers remote firmware upgrade option eliminating the need to physically uninstall the unit
  • Conforms to ONVIF specifications for interoperability between network video products regardless of manufacturer
  • Three power options- PoE (Power-over-Ethernet), 24 VAC, and 12 VDC increase its flexibility, and a UPS can also be used for continuous operation even during a power failure
  • Secured access with password protection
  • Full support for iSCSI recording
  • Includes H.264 compression, bandwidth throttling, and multicasting capabilities
  • Operating temperature without heater on: -20 ºC to +50 ºC (-4 ºF to +122 ºF)
  • Suitable for indoor as well as outdoor use via support for flush mounting option
Signal System NTSC
Sensor 1/3" CCD, WDR, dual shutter
Pixels 768 x 494
Compression H.264 (ISO/IEC 14496-10); M-JPEG, JPEG
Data Rate 9.6 Kbps to 6 Mbps
Resolution 4CIF: 704 x 480 (30 ips)
CIF: 352 x 240 (30 ips)
Delay Overall IP Delay: Min. 120 ms, Max. 240 ms
GOP Structure I, IP
Frame Rate 1 to 60 H.264
1 to 30 M-JPEG
Video Output Analog composite for service (2.5mm jack)
Horizontal Resolution 540 TVL
Signal to Noise Ratio 50 dB
Sensitivity Color

30 IRE: 0.28 Lux
50 IRE: 0.621 Lux
100 IRE: 2.48 Lux

Color + 10x SensUp

30 IRE: 0.028 Lux
50 IRE: 0.062 Lux
100 IRE: 0.248 Lux


30 IRE: 0.099 Lux
50 IRE: 0.23 Lux
100 IRE: 1.01 Lux

Mono + 10x SensUp

30 IRE: 0.0099 Lux
50 IRE: 0.023 Lux
100 IRE: 0.1 Lux
Controls Day/Night: Color, Mono, Auto

Modes: 6 preset programmable modes

Dynamic Range: 120 dB (20-bit image processing)

Signal-to-noise Ratio: > 50 dB

SmartBLC: On (includes 2X-Dynamic ) / Off

Gain: AGC On or Off (0 - 30 dB) selectable

White Balance: ATW (2500 to 10000 K), ATWHold

Shutter: Auto 1/60 to 1/50000 automatic flickerless, fixed selectable

Sensitivity up: Adjustable from Off up to 10x

Autoblack: Automatic continuous, Off

Dynamic Noise Reduction: Auto, On/off selectableSharpness: Sharpness enhancement level selectable

Peak White Invert On/Off

Privacy Masking: Four independent areas, fully programmable

Video Motion Analysis: Motion+ or IVA

Test Pattern Generator: Color bars 100%, Grayscale 11-step, Sawtooth 2H, Checker board, Cross hatch, UV plane

Synchronization: Internal, Line Lock, selectable

Controls: OSD with soft-key operation (multi-lingual)
Audio Standard G.711: 300 Hz to 3.4 kHz at 8 kHz sampling rate
Signal-to-noise ratio: > 50 dB
Audio I/O Audio: 1 x mono line in, 1 x mono line out
Signal line in: 9 kOhm typical, 5.5 Vpp max

Signal line out:
3.0 Vpp at 10 kOhm typical
2.3 Vpp at 32 Ohm typical
1.7 Vpp at 16 Ohm typical
Alarm Inputs Alarm: 1 non-isolated closing contact input
Activation voltage: +5 VDC to +40 VDC (+3.3 VDC with DC-coupled 22 kOhm pull-up resistor)
Relay Outputs Relay: 1 output
Voltage: 30 VAC or +40 VDC
Maximum 0.5 A continuous, 10VA
Software Control Unit Configuration: Via web browser or Configuration Manager
Flicker Control: 50/60 Hz, selectable
Software update: Flash ROM, remote programmable
Network Protocol RTP, Telnet, UDP, TCP, IP, HTTP, HTTPS, FTP, DHCP, IGMP V2/V3, ICMP, ARP, SMTP, SNTP, SNMP, 802.1x, UPnP
Encryption TLS 1.0, SSL, AES (optional)
Ethernet STP, 10/100 Base-T, auto-sensing, half/full duplex, RJ45
PoE IEEE 802.3af compliant
Lens Focal Length: 2.8-10mm mm
Type: IR corrected
Zoom: manual
Focus: manual
Iris: Automatic iris control
Viewing angle: Wide 100.8 x 73.7° (H x V) / Tele 28.5 x 21.4° (H x V)
Power Requirements 24 VAC ±10% 60 Hz
12 VDC ±10%
Power Consumption 550 mA / 700 mA IVA (12 VDC)
550 mA / 700 mA IVA (24 VAC)
200 mA (PoE 48 VDC)
Construction Mounting: Flush mount or surface mount

Color: White (RAL9010) trim ring with black inner liner

Adjustment range: 360º pan, 90º tilt, ±90º azimuth

Dome bubble: Polycarbonate, clear with UV blocking antiscratch coating

Trim ring: Aluminum
IP Rating IP 66 and NEMA‑4X
Dimensions (Diam. x H) Surface Mount: 6.2 x 4.9" (158 x 124mm)
Flush Mount: 6.21 x 3.3" (158 x 84mm) - exposed portion
Weight Surface Mount: 2.8 lb (1.3 kg)
Flush Mount: 1.5 lb (0.7 kg)

facebook.png twitter.png linkedin.png youtube.png
Prices and specifications subject to change without notice.