Search
By: Sentech
http://www.avsupply.com/images/logos/sentech-logo.gif
Industrial, USB, & Medical Cameras
Contact us for lowest price (800) 284-2288, (858) 565-1101, sales@avsupply.com, or fax (858) 300-4193
Raw Digital Output Monochome Camera

The Sentech STC-B33A is a 1/3" monochrome CCD, digital raw data output board camera with 648 (H) x 494 (V) resolution. This series features a VGA sensor with a scan rate of 30, 60 and 90fps, digital raw data output and variable integration shutter trigger.
 

STC-B33A features include:

  • 1/3" CCD Image Sensor
  • VGA (0.3 MegaPixel), 90fps
  • Raw Digital Output (Low Volt TTL)
Resolution VGA (0.3 MegaPixel)
Image Sensor 1/3" Interline CCD (ICX424AL)
Signal Format Progressive: Monochrome
Frame Rate 30, 60, 90 fps
Effective Picture Element 659 (H) x 494 (V)
Active Picture Element 648 (H) x 494 (V)
Chip Size (mm) 5.79 (H) x 4.89 (V) mm
Cell Size (um) 7.4 (H) x7.4 (V) µm
Vertical Frequency 31.47 (30fps) / 62.94 (60fps) / 94.784 (90fps) Hz
Horizontal Frequency 15.7343 (30fps) / 31.4685 (60fps) / 47.2028 (90fps) kHz
Horizontal Drive Frequency 12.2727 (30fps) / 24.5454 (60fps) / 36.8181 (90fps) MHz
Scanning Method Full scanning, Partial full scanning, 1/2 partial scanning, 1/4 partial scanning, Variable partial scanning, Binning, Binning partial scanning, Binning 1/2 partial scanning, Binning 1/4 partial scanning, Binning variable partial scanning
Sync System Internal / External
Communication RS232 via DF12-36DS-0.5V connector
Trigger Shutter Edge Preset Trigger (V-reset, Non-reset), Pulse Width Trigger (V-reset, Non-reset)
Shutter Speed OFF, 1/3 to 1/40,000 seconds (Variable at every H and clock) (30fps) OFF, 1/7 to 1/80,000 seconds (Variable at every H and clock) (60fps) OFF, 1/11 to 1/120,000 seconds (Variable at every H and clock) (90fps)
Minimum Illumination 0.12 Lux at F1.2
Gain 0 to 27 dB
S/N Ratio @ 8bit output: ≤ 3 Digit (Gain 0 dB); @ 10bit output: ≤ 10 Digit (Gain 0 dB)
Gamma 1.0
Lens Mount C Mount
Video Output Digital 8 or 10 bit parallel low voltage output
Tap 1 Tap
Interface Connector DF12-36DS-0.5V (Hirose)
Optical Filter No IR cut filter
Optical Center Accuracy Positional Accuracy in H and V Directions: /- 0.31 mm Rotational Accuracy of H and V: /- 2.1 deg.
Power 12Vdc ± 10%
Power Consumption < 1.8W, 150mA
Operating Temperature It depends on 1) how the system is assembled and 2) how heat conditions are managed within the system.
Storage Temperature -30°C ~ 65°C (-38.1°F ~ 149°F)
Dimensions 28 (W) x 28 (H) x 33 (D) mm (1.1" x 1.1" x 1.29")
Weight 26g (0.91 oz)

 



facebook.png twitter.png linkedin.png youtube.png
Prices and specifications subject to change without notice.