By: Nitek
Video Transmission Solutions
Contact us for lowest price (800) 284-2288, (858) 565-1101,, or fax (858) 300-4193
Dual Channel Rack Mount Video & Data Transmitte

Nitek's FTS324104R00 is a two channel video and data, Universal-Mode™ transmitter. The system requires a single fiber per channel. Both video and data are transmitted over the same fiber channel. Nitek's unique Universal-Mode™ optics allow the unit to be used with single-mode or multi-mode fiber optic cabling types.

The 3000 Series fiber optic transmission systems are designed to provide point-to-point, broadcast quality video transmission at an affordable cost, without compromise. The video is transmitted in a real time full bandwidth digital format. This insures the highest quality regardless of distance. By transmitting the video in an uncompressed format, there is no latency or loss of video quality.

An Automatic Gain control feature built into the 3000 Series compatible receivers makes this a ‟plug-and-play” video system, requiring no field setup or adjustments. The receivers are equipped with LED indicators which provide an at-a-glance operating and optics state. The 3000 Series 10 bit digital technology combined with ease of installation and inherent reliability have made this the system of choice for many critical applications.

FTS324104R00 features include:

  • Real time 10 Bit digital video eliminates signal degradation associated with distance.
  • Automatic Gain control minimizes setup and adjustment time.
  • Switchable P/T/Z data interface allows interfacing with a wide range of manufacturers protocols.
  • Universal-Mode™ allows the same unit to be used with multi-mode or single-mode fiber without any set up or field configuration.
  • Wide dynamic range. Provides ‟broadcast quality” video transmission.
  • Directly supports all NTSC, PAL or SECAM video formats.
  • Receiver is equipped with front panel LED status indicators to provide at-a-glance diagnostics of the system's video and optics state.
  • Modular rack mount card provides flexible system design.

 System Design


Not Available in 3000 Series

See 5000 Series


Accepts both multi- and single-mode fiber


50/125 or 62.5/125





Optical Connector


Path Loss

20dB min.


Operating Temperature

-40 to 165 Fahrenheit

Operating Humidity

0 to 95% non-condensing

Power Requirements

+12VDC to +24VDC ac/dc 1.5 Watts



3 U


1 Card Slot





None, Uncompressed

Input / Output Level

1V p/p nominal

Input / Output Impedance

 75 Ohm Unbalanced

Frequency Response

10Hz to 5.75Mhz

Differential Gain


Differential Phase


Signal to Noise Ratio

67dB minimum

Fiber Connector


Video Connection


Video Standard



Data interface

RS232, RS422 (full duplex, two wire)


RS485 (half duplex, two wire)

Slide switch selectable


Data rate per channel

Up to 512kb/s

 Auxiliary Communication

Bi-directional contact closure/alarms

Alarm in

Contact/relay in

Alarm out

100V / 150mA max.


Not Available in 3000 Series

See 5000 Series

facebook.png twitter.png linkedin.png youtube.png
Prices and specifications subject to change without notice.