Search

Eight Channel Stand Alone Video & Data Receiver

Contact us for lowest price (800) 284-2288 , (858) 565-1101 Call Now [email protected]

Nitek's FRS581100S00 is an eight channel Universal-Mode™ video receiver. Nitek's unique Universal-Mode™ optics allow the same unit to be used with 1 single-mode or multi-mode fiber optic cabling type.

The 5000 Series fiber optic transmission systems are designed to provide multi-channel, point-to-point, broadcast quality video transmission at an affordable cost, without compromise. The video is transmitted in a real time full bandwidth digital format. This insures the highest quality regardless of distance. By transmitting the video in an uncompressed format, there is no latency or loss of video quality. The 5000 Series uses Coarse Wavelength Division Multiplexing (CWDM) to transmit 2 wavelength channels for video transmission on a single optical fiber.

Automatic gain control is built into the 5000 Series receivers making this a ‟plug-and-play” video system, requiring no field setup or adjustments. Receivers are equipped with LED indicators which provide an at-a-glance operating and optics state.

FRS581100S00 features include:

  • Real time digital transmission eliminates signal degradation associated with distance.
  • Universal-Mode™ allows the same unit to be used with multi-mode or single-mode fiber without any set up or field configuration.
  • Wide dynamic range. No adjustments are required for installation, ‛plug-and-play’.
  • Configurations available in single fiber and twin fiber configurations.
  • Receivers equipped with front panel LED status indicators provide at-a-glance diagnostics of the systems video and optics state.
  • Front panel LED status indicators provide at-a-glance status monitoring.
  • Standalone transmitters and receivers for ease of installation.

 System Design

Optical

Accepts both multi- and single-mode fiber

Multi-mode

50/125 or 62.5/125

Single-mode

9/125

Wavelength

1310nm

1550 Option

1550nm

Single Fiber option

1310/1550nm

CWDM Option

1310-1610nm

Optical Connector

SC-PC

Path Loss

20dB min.

CWDM option

22dB min.

 General

Operating Temperature

-40 to 165 Fahrenheit

Operating Humidity

0 to 95% non-condensing

Power Requirements

+12VDC to +24VDC ac/dc

 Mechanical

Height

5.2

Width

2.1

Depth

6.7

 Video

Compression

None, Uncompressed

Input / Output Level

1V p/p nominal

Input / Output Impedance

75 Ohm Unbalanced

Frequency Response

10Hz to 5.75Mhz

Differential Gain

1%

Differential Phase

1

Signal to Noise Ratio

67dB minimum

Fiber Connector

SC-PC

Video Connection

BNC

Video Standard

NTSC/PAL

 P/T/Z Data

Data interface

RS232, RS422 (full duplex, two wire)

 

RS485 (half duplex, two wire)

Slide switch selectable

Yes

Data rate per channel

Up to 512kb/s w/o Ethernet

 

Up to 256kb/s w/ Ethernet

 Ethernet Data

Data Interface

10/100BaseT auto negotiate

Data Connector

RJ45



facebook.png twitter.png googleplus.png linkedin.png youtube.png
Prices and specifications subject to change without notice.