Call Now: 1-800-284-2288 |
(discontinued)32x32 DigitalMedia Switcher |
|
|
This product has been discontinued. For a replacement, please see DM-MD32X32-CPU3
Crestron® DM® Switchers provide the foundation for a complete DigitalMedia™ system, delivering an advanced 4K ultra high-definition AV signal routing solution that's extremely flexible and installer-friendly. The DM-MD32X32 affords ultra fast switching and pure, lossless distribution of HDMI® and other signals to support all the Blu-ray Disc® players, HDTV receivers, digital media servers, computers, cameras, and display devices that fill any modern home or commercial facility. DigitalMedia thoughtfully manages all of the disparate AV signals and devices to deliver a transparent user experience, and ensure an optimum video image and audio signal at every location.
The DM-MD32X32 is field-configurable to handle up to 32 AV sources of virtually any type. The outputs are also field-configurable to provide up to 32 DM, HDBaseT®, and/or HDMI outputs, or up to 16 H.264 streaming outputs, in a single chassis.[1] A full selection of DM switcher input cards, DM transmitters, and DM receivers provides extensive connectivity throughout a residence or commercial facility, supporting a complete range of analog and digital signal types — all through one switcher!
Integrated Ethernet networking and USB distribution provide a complete connectivity solution combined with built-in Crestron control[2] for managing the displays and other room devices without necessitating any additional wiring. User-friendly operation, setup, and troubleshooting tools are provided through the DM-MD32X32 front panel, or via Crestron Toolbox™ software, to make setting up a complete multiroom 4K video distribution system easy.
Available Configurations Include:
DM-MD32X32-RPS 32x32 DigitalMedia™ Switcher w/ Redundant Power Supply
DM-MD32X32 features include:
Video | ||
Switcher | 32x32 digital matrix, modular input/output cards, Crestron QuickSwitch HD® | |
Input Signal Types | Configurable via modular plug-in cards supporting HDMI®, DisplayPort Multimode[11], DVI, HDBaseT®, SDI, RGB/VGA, component, S-Video, composite, DM® CAT, DM Fiber, DM 8G+™, DM 8G® Fiber, DM 8G SM Fiber, & H.264 streaming | |
Output Signal Types | Configurable via factory-installed output cards supporting DM CAT, DM Fiber, DM 8G+, DM 8G Fiber, DM 8G SM Fiber, HDBaseT, HDMI, DVI[12], & H.264 streaming (All input cards also include HDMI pass-thru outputs) | |
Formats | HDMI, HDBaseT, or DM 8G w/Deep Color, 3D, & 4K[3]; DM (1st generation) w/Deep Color & 3D; DVI; HDCP content protection support; SD-SDI, HD-SDI, & 3G-SDI; RGBHV, RGBS, RGsB, YPbPr, Y/C, NTSC, & PAL; H.264 (MPEG-4 part 10 AVC) | |
Input Resolutions | Refer to the specifications for each input card | |
Output Resolutions | Refer to the specifications for each output card | |
Backplane Data Rate | 12.5 Gbps | |
Audio | ||
Switcher | 32x32 digital multichannel audio-follow-video matrix switching, plus independent 32x32 stereo matrix for audio breakaway | |
Input Signal Types | Configurable via modular plug-in cards supporting HDMI, DisplayPort Multimode[11], HDBaseT, SDI, analog (stereo 2-channel), SPDIF, DM CAT, DM Fiber, DM 8G+, DM 8G Fiber, DM 8G SM Fiber, & H.264 streaming | |
Output Signal Types | Configurable via factory-installed output cards supporting DM CAT, DM Fiber, DM 8G+, DM 8G Fiber, DM 8G SM Fiber, HDBaseT, HDMI, analog (stereo 2-channel), & H.264 streaming; (All input cards also include HDMI pass-thru outputs, and most digital audio input cards also include analog stereo pass-thru audio outputs) | |
Formats | Refer to the specifications for each input and output card | |
Communications | ||
Ethernet | 10/100/1000 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, DHCP | |
USB | USB signal routing via select input cards, transmitters, receivers, and extenders[14]; USB computer console port for setup | |
DigitalMedia | DM 8G+, DM 8G Fiber, DM 8G SM Fiber, DM Fiber, DM CAT, DMNet®, HDCP, EDID, CEC, PoDM, Ethernet | |
HDBaseT | HDCP, EDID, PoH, Ethernet | |
HDMI | HDCP, EDID, CEC | |
NOTE: Supports management of HDCP and EDID; supports pass-through and management of CEC between HDMI source and sink, or between HDMI device(s) and a control system | ||
Ethernet Switch | ||
66-port switch with Private Network Mode; provides (1) rear panel 10Base-T/100Base-TX/1000Base-T LAN port, (1) internal 100 Mbps port for the switcher, and (64) internal 100 Mbps ports for the I/O cards | ||
USB Switch | ||
32x32 matrix, follow video or breakaway | ||
Card Slots | ||
1 – 32 | (32) DM switcher input card slots; Each slot accepts (1) DMC-series input card |
|
DM OUTPUTS (SLOT 1 – 8) | (8) DM switcher output card slots; Each slot accepts (1) DMCO-series output card |
|
Connectors | ||
LAN | (1) 8-wire RJ45 female; 10Base-T/100Base-TX/1000Base-T Ethernet port |
|
24ABG / EIG 1 – 4 (SLOT 1 – 8) | (32) sets of (1) 4-pin and (1) 3-pin 3.5mm detachable terminal blocks; Comprises (32) DMNet ports with “EIG” power selection ports, each set associated with a corresponding DM CAT output port on the output card in any output slot; Each DMNet port provides power and communications for a DM CAT device connected via DM cable; Each EIG port connects to an external power supply[15], or to the internal power source via a jumper, to power the DM CAT device connected to the corresponding DMNet port; Maximum Load: 40 Watts (1.66 Amps @ 24 Volts DC) per port, limited to available DMNet power from internal power supply (see "Power Requirements" below) or external power supply[15] |
|
100-240V~11-4.5A 50/60Hz | (1) IEC 60320 C14 main power inlet; Mates with removable power cord, included |
|
G | (1) 6-32 screw, chassis ground lug | |
COMPUTER (front) | (1) USB Type B female; USB computer console port (6 ft cable included) |
|
LCD Display | ||
Green LCD dot matrix, 128 x 64 resolution, adjustable LED backlight; |
||
Controls & Indicators | ||
SOFTKEYS | (4) pushbuttons for activation of LCD driven functions | |
HW-R | (1) recessed miniature pushbutton for hardware reset, reboots the switcher | |
ROUTE | (1) pushbutton and red LED, selects ROUTE mode to allow routing changes | |
VIEW | (1) pushbutton and red LED, selects VIEW mode for viewing current routes | |
INFO | (1) pushbutton and red LED, selects INFO mode for viewing AV and device info | |
MENU | (1) pushbutton, steps menu back one level | |
ENTER | (1) pushbutton, executes highlighted menu or value | |
AUDIO | (1) pushbutton & red LED, selects audio routing view | |
VIDEO | (1) pushbutton & red LED, selects video routing view | |
USB | (1) pushbutton & red LED, selects USB routing view | |
Quick-Adjust Knob | (1) continuous turn rotary encoder, adjusts menu parameters | |
IN 1 – 32 | (32) pushbuttons and red LEDs, select input for routing | |
OUT 1 – 32 | (32) pushbuttons and red LEDs, select output for routing | |
LAN (rear) | (2) LEDs, green LED indicates Ethernet link status, amber LED indicates Ethernet activity | |
Power Requirements | ||
Main Power | 11-4.5 Amps @ 100-240 Volts AC, 50/60 Hz | |
Available DMNet Power | 220 Watts (9.2 Amps @ 24 Volts DC) from internal power supply | |
Available PoDM/PoH Power | Refer to the specifications for each DM 8G+ input and output card | |
Environmental | ||
Temperature | 32° to 104°F (0° to 40°C) | |
Humidity | 10% to 90% RH (non-condensing) | |
Heat Dissipation | 3000 BTU/Hr | |
Enclosure | ||
Chassis | Metal with black finish, integrated rack ears, vented sides, fan-cooled | |
Front Panel | Metal, black finish with polycarbonate label overlay | |
Mounting | 14U 19-inch rack-mountable (rack ears built in) | |
Dimensions | ||
Height | 24.44 in (621 mm) | |
Width | 19.16 in (487 mm) | |
Depth | 15.75 in (400 mm) without cards | |
Weight | ||
64.5 lb (29.3 kg) without cards |
dm-md32x32.pdf | Datasheet |
Call Now: 1-800-284-2288 |
|||||
Email Us: sales@avsupply |
|||||
|