Call Now: 1-800-284-2288 |
(discontinued)DigitalMedia CAT Transmitter 200 |
|
|
This product is discontinued. For an alternative, please contact [email protected]
The DM-TX-200 is a DM® CAT transmitter and switcher that provides a convenient interface for computers and other high-definition AV sources as part of a complete Crestron® DigitalMedia™ system. The DM-TX-200 is ideal for use at a lectern, conference table, wall plate, or any remote location in a boardroom, classroom, auditorium, or residence. It connects to the head end or display location using a single Crestron DM cable, providing HDMI®, VGA, and analog audio inputs, plus a USB HID host port.
DM-TX-200 features include:
Video | ||
Switcher | 2x1 combination digital/analog switch, Crestron QuickSwitch HD® | |
Input Signal Type | HDMI®, DVI[2], DisplayPort Multimode[2], RGB, component (YPbPr)[3], S-Video (Y/C)[3], composite[3] | |
Output Signal Type | DM® CAT (DigitalMedia™ over twisted-pair copper wire) | |
Formats | HDMI, DVI, HDCP content protection support, computer up to UXGA/WUXGA, HD up to 1080p60, NTSC or PAL | |
Input Resolutions, HDMI & DVI, Progressive | 640x480@60Hz, 720x480@60Hz (480p), 720x576@50Hz (576p), 800x600@60Hz, 848x480@60Hz, 852x480@60Hz, 854x480@60Hz, 1024x768@60Hz, 1024x852@60Hz, 1024x1024@60Hz, 1280x720@50Hz (720p50), 1280x720@60Hz (720p60), 1280x768@60Hz, 1280x800@60Hz, 1280x960@60Hz, 1280x1024@60Hz, 1360x768@60Hz, 1365x1024@60Hz, 1366x768@60Hz, 1400x1050@60Hz, 1440x900@60Hz, 1600x900@60Hz, 1600x1200@60Hz, 1680x1050@60Hz, 1920x1080@24Hz (1080p24), 1920x1080@25Hz (1080p25), 1920x1080@50Hz (1080p50), 1920x1080@60Hz (1080p60), 1920x1200@60Hz, 2048x1080@24Hz, 2048x1152@60Hz, plus any other resolution allowed by HDMI up to 165MHz pixel clock | |
Input Resolutions, HDMI & DVI, Interlaced | 720x480@30Hz (480i), 720x576@25Hz (576i), 1920x1080@25Hz (1080i25), 1920x1080@30Hz (1080i30), plus any other resolution allowed by HDMI up to 165MHz pixel clock | |
Input Resolutions, RGB | 640x480@60Hz, 720x480@60Hz (480p), 720x576@50Hz (576p), 800x600@60Hz, 848x480@60Hz, 1024x768@60Hz, 1280x720@50Hz (720p50), 1280x720@60Hz (720p60), 1280x768@60Hz, 1280x800@60Hz, 1280x960@60Hz, 1280x1024@60Hz, 1360x768@60Hz, 1366x768@60Hz, 1400x1050@60Hz, 1440x900@60Hz, 1600x1200@60Hz, 1680x1050@60Hz, 1920x1080@50Hz (1080p50), 1920x1080@60Hz (1080p60), 1920x1200@60Hz, 2048x1152@60Hz | |
Input Resolutions, Component[3] | 480i, 576i, 480p, 576p, 720p50, 720p60, 1080p24, 1080i25 (1125 lines), 1080i30, 1080p30, 1080p50 (1125 lines), 1080p60 | |
Input Resolutions, Composite and S-Video[3] | 480i, 576i | |
Output Resolutions | Matched to inputs | |
Analog-To-Digital Conversion | 10-bit 165 MHz per each of 3 channels | |
Audio | ||
Switcher | 2x1 combination digital/analog switch | |
Input Signal Types | HDMI, DisplayPort Multimode[2], analog stereo | |
Output Signal Type | DM CAT | |
Formats, HDMI | Dolby Digital®, Dolby Digital EX, DTS®, DTS-ES, DTS 96/24, Up to 8ch PCM | |
Formats, Analog | Stereo 2-channel | |
Analog-To-Digital Conversion | 24-bit 48 kHz | |
Performance (analog) | Frequency Response: 20Hz to 20kHz ±0.75dB; S/N Ratio: >90dB, 20Hz to 20kHz A-weighted; THD+N: <0.05% @ 1kHz; Stereo Separation: >90dB |
|
Communications | ||
DigitalMedia | DM CAT, DMNet®, HDCP management, EDID format management, CEC | |
USB | Supports USB HID class devices | |
Connectors | ||
HDMI | (1) 19-pin Type A HDMI female; HDMI digital video/audio input; Also supports DVI and DisplayPort Multimode[2] |
|
USB HID | (1) USB Type A female; USB host port for connection of a mouse/keyboard or other USB HID-compliant device |
|
RGB | (1) DB15HD female; RGB (VGA), component, S-Video, or composite video input[3]; Formats: RGBHV, RGBS, RGsB, YPbPr, Y/C, NTSC, PAL; Input Levels: 0.5 to 1.5 Vp-p with built-in DC restoration; Input Impedance: 75 Ohms; Sync Input Type: Autodetect RGBHV, RGBS, RGsB, YPbPr; Sync Input Level: 3 to 5 Vp-p; Sync Input Impedance: 1k Ohms |
|
AUDIO | (1) 3.5mm TRS mini phone jack; Unbalanced stereo line-level audio input; Input Level: 2 Vrms maximum; Input Impedance: 10k Ohms |
|
DM OUT, D & M | (1) DM CAT output composed of (2) 8-pin RJ45 female, shielded; Connects to DM CAT input of a DM switcher, receiver/room controller, or other DM device via DM-CBL cable[1] |
|
DM OUT, G B A 24 | (1) 4-pin 3.5mm detachable terminal block, DMNet port; Connects to DMNet port of a DM switcher, receiver/room controller, or other DM device via DM-CBL cable[1] |
|
G | (1) 6-32 screw, chassis ground lug | |
DM Cable Length | ||
Cable Type: DM-CBL DigitalMedia Cable |
Maximum length without, between, before, or after repeaters:
Maximum total length using up to 2 repeaters:
|
|
Controls & Indicators | ||
PWR | (1) green LED, indicates operating power supplied via DMNet | |
DM LINK | (1) green LED, indicates DM link status | |
HDMI IN | (1) green LED, indicates HDMI input is selected | |
RGB IN | (1) green LED, indicates RGB input is selected | |
SETUP | (1) red LED and (1) miniature recessed pushbutton for Ethernet setup | |
RESET | (1) miniature recessed pushbutton for hardware reset | |
Power Requirements | ||
DMNet Power Usage | 12 Watts (0.5 Amps @ 24 Volts DC) | |
Environmental | ||
Temperature | 32° to 104°F (0° to 40°C) | |
Humidity | 10% to 90% RH (non-condensing) | |
Heat Dissipation | 41 BTU/Hr | |
Enclosure | ||
Chassis | Metal with black finish | |
Mounting | Free-standing or surface mountable (mounting bracket included); also fits in a divided Wiremold® 6000 Series Raceway | |
Dimensions | ||
Height | 6.97 in (177 mm) | |
Width | 2.76 in (70 mm); 3.95 in (100 mm) with mounting bracket |
|
Depth | 1.68 in (43 mm) | |
Weight | ||
17.4 oz (493 g) |
dm-tx-200.pdf | Datasheet |
Call Now: 1-800-284-2288 |
|||||
Email Us: sales@avsupply |
|||||
|