Search

DigitalMedia 8G Fiber Receiver & Room Controller 150

Crestron - DM-RMC-150-S View Larger Image (in new window)

Crestron : DM-RMC-150-S

By: Crestron
https://www.avsupply.com/images/logos/crestron-logo.jpg
The World's Leader for Advanced Home, Campus & Building Control Automation Solutions
Contact us for lowest price (800) 284-2288 , (858) 565-1101 Call Now [email protected]

The DM-RMC-150-S provides an enhanced one-box interface solution for a single display device as part of a complete Crestron® DigitalMedia™ system. It functions as a DM 8G® Fiber receiver and control interface, providing a single HDMI® output and an analog audio output, plus Ethernet, USB HID, and a variety of control ports. Its compact, low-profile design allows the DM-RMC-150-S to be installed discreetly behind a flat panel display or above a ceiling mounted projector. It connects to the head end or source location using a single multimode fiber strand.[1]

DM-RMC-150-S features include:

  • DigitalMedia 8G™ Fiber receiver, audio extractor, and display controller
  • Connects to a DM® switcher or transmitter over one multimode fiber strand [1]
  • Supports cable lengths up to 1000 ft (300 m) using CresFiber® 8G, or 500 ft (150 m) using other multimode fiber [1]
  • Provides one HDMI® or DVI display output [2]
  • Handles video resolutions up to Full HD 1080p
  • Handles computer resolutions up to WUXGA
  • Handles 3D video and Deep Color
  • Handles Dolby® TrueHD, DTS-HD®, and uncompressed 7.1 linear PCM audio
  • Provides a stereo analog line-level audio output with volume control [3]
  • Allows extraction of stereo 2-channel audio signals [3]
  • HDCP compliant
  • Provides a 10/100 Ethernet LAN connection
  • Enables device control via CEC, IR, RS-232, and Ethernet
  • Provides two relay control ports and one contact sensing input
  • Enables USB HID signal extension for a local keyboard/mouse
  • Compatible with Crestron USB over Ethernet Extenders [4]
  • Allows quick, easy setup and diagnostics
  • Low-profile surface mount design
  • Universal power pack included
Video
  Input Signal Type DM 8G® Fiber (DigitalMedia™ over one multimode fiber optic strand)[1]
  Output Signal Types HDMI®, DVI[2]
  Formats DM 8G Fiber & HDMI w/Deep Color & 3D, DVI, HDCP content protection support
  Input Resolutions, Progressive 640x480@60Hz, 720x480@60Hz (480p), 720x576@50Hz (576p), 800x600@60Hz, 848x480@60Hz, 852x480@60Hz, 854x480@60Hz, 1024x768@60Hz, 1024x852@60Hz, 1024x1024@60Hz, 1280x720@50Hz (720p50), 1280x720@60Hz (720p60), 1280x768@60Hz, 1280x800@60Hz, 1280x960@60Hz, 1280x1024@60Hz, 1360x768@60Hz, 1365x1024@60Hz, 1366x768@60Hz, 1400x1050@60Hz, 1440x900@60Hz, 1600x900@60Hz, 1600x1200@60Hz, 1680x1050@60Hz, 1920x1080@24Hz (1080p24), 1920x1080@25Hz (1080p25), 1920x1080@50Hz (1080p50), 1920x1080@60Hz (1080p60), 1920x1200@60Hz, 2048x1080@24Hz, 2048x1152@60Hz, plus any other resolution allowed by HDMI up to 165MHz pixel clock
  Input Resolutions, Interlaced 720x480@30Hz (480i), 720x576@25Hz (576i), 1920x1080@25Hz (1080i25), 1920x1080@30Hz (1080i30), plus any other resolution allowed by HDMI up to 165MHz pixel clock
  Output Resolutions Matched to input
Audio
  Input Signal Type DM 8G Fiber
  Output Signal Types HDMI, analog stereo[3]
  Formats, HDMI Dolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby® TrueHD, DTS®, DTS-ES, DTS 96/24, DTS-HD High Res, DTS-HD Master Audio™, up to 8ch PCM
  Formats, Analog Stereo 2-Channel[3]
  Digital-To-Analog Conversion 24-bit 48 kHz
  Performance (analog) Frequency Response: 20Hz to 20kHz ±0.5dB;
S/N Ratio: >95dB 20Hz to 20kHz A-weighted;
THD+N: <0.005% @ 1kHz;
Stereo Separation: >90dB
  Volume Gain Range (analog) -80dB to 0dB
Communications
  Ethernet 10/100 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, DHCP
  USB Supports signal extension of USB HID class devices, expandable to support virtually any USB 1.1 or 2.0 device using Crestron USB-EXT-DM USB over Ethernet Extenders[4]
  RS-232 2-way device control and monitoring up to 115.2k baud with hardware and software handshaking
  IR/Serial 1-way device control via infrared up to 1.1 MHz or serial TTL/RS-232 (0-5 Volts) up to 19.2k baud
  DigitalMedia DM 8G Fiber, HDCP, EDID, CEC, Ethernet
  HDMI HDCP, EDID, CEC
  NOTE: Supports management of HDCP and EDID; supports pass-through and management of CEC between HDMI source and sink, or between HDMI sink and a control system
Connectors
  DIG IN (1) 2-pin 3.5mm detachable terminal block;
Digital/contact closure sensing input;
Rated for 0-24 Volts DC, referenced to GND;
Input Impedance: 2.2k Ohms pulled up to 5 Volts DC;
Logic Threshold: 2.5 Volts DC nominal with 1 Volt hysteresis band
  HDMI OUT (1) 19-pin Type A HDMI female;
HDMI digital video/audio output;
Also supports DVI[2]
  USB HID (1) USB Type A female;
USB 2.0 host port for connection of a mouse/keyboard or other USB HID-compliant device
  RELAY 1 – 2 (1) 4-pin 3.5mm detachable terminal block comprising (2) normally open, isolated relays;
Rated 1 Amp, 30 Volts AC/DC;
MOV arc suppression across contacts
  COM (1) 5-pin 3.5mm detachable terminal block, bidirectional RS-232 port;
Up to 115.2k baud, hardware and software handshaking support
  IR 1 – 2 (1) 4-pin 3.5mm detachable terminal block comprising (2) IR/Serial ports;
IR output up to 1.1 MHz;
1-way serial TTL/RS-232 (0-5 Volts) up to 19200 baud
  LAN (1) 8-wire RJ45 female, shielded;
10Base-T/100Base-TX Ethernet port
  Ground (1) 6-32 screw, chassis ground lug
  DM IN MMF/SC (1) SC female optical fiber connector;
DM 8G Fiber input;
Connects to DM 8G Fiber output of a DM switcher, transmitter, or other DM device via CresFiber® 8G fiber optic cable[1]
  AUDIO OUT R, L (2) RCA female;
Stereo unbalanced line-level audio output[3];
Output Level: 2 Vrms maximum;
Output Impedance: 100 Ohms nominal
  24VDC 0.75A MAX (1) 2.1 x 5.5 mm DC power connector;
24 Volt DC power input;
PW-2407WU power pack included
Controls & Indicators
  HDMI OUT (1) green LED, indicates video signal presence at the HDMI output
  LAN (2) LEDs, green LED indicates Ethernet link status, amber LED indicates Ethernet activity
  DM IN (1) green LED, indicates DM link status
  RESET (1) miniature recessed pushbutton, for hardware reset
  SETUP (1) red LED and (1) miniature recessed pushbutton, for Ethernet setup
  24VDC (1) green LED, indicates operating power supplied via local power pack
Power Requirements
  Power Pack 0.75 Amps @ 24 Volts DC;
100-240 Volts AC, 50/60 Hz power pack, model PW-2407WU included
Environmental
  Temperature 32° to 104°F (0° to 40°C)
  Humidity 10% to 90% RH (non-condensing)
  Heat Dissipation 35 BTU/Hr
Enclosure
  Chassis Metal, black finish, with (2) integral mounting flanges, vented top and bottom
  Mounting Freestanding, surface mount, or attach to a single rack rail
Dimensions
  Height 8.49 in (216 mm)
  Width 6.53 in (166 mm)
  Depth 1.07 in (28 mm)
Weight
  24 oz (681 g)


facebook.png twitter.png googleplus.png linkedin.png youtube.png
Prices and specifications subject to change without notice.