Search
By: Crestron
http://www.avsupply.com/images/logos/crestron-logo.jpg
The World's Leader for Advanced Home, Campus & Building Control Automation Solutions
Contact us for lowest price (800) 284-2288, (858) 565-1101, sales@avsupply.com, or fax (858) 300-4193
Cresnet Interface to Crestron CSM-QMT30 Shades

The CSC-DCCN is an interface designed to control one Crestron CSM-QMT30 shade motor and provide two-way communication between the motor and control system over Cresnet®. The CSC-DCCN features local buttons that allow for setting up limits and testing of the shades without use of the control system. In addition to controlling the shade motor, the CSC-DCCN provides 24 V power to a CSM-QMT30 motor. The CSC-DCCN can be surface mounted or mounted in a single-gang electrical box using a CSC-BRKT-1G mounting bracket (sold separately).

Power Requirements
  Power Pack Use a Crestron® CSA-PWS40 Power Pack (sold separately; see in Available Accessories)
Connections
  G 24/PWR G 24 (1) 2-pin 3.5mm detachable terminable block, power input from power supply
  G 24 + G - (1) 5-pin 3.5mm detachable terminable block, power and control to roller shade
  NET (2) 4-pin 3.5mm detachable terminal blocks; Cresnet® slave port and power input
Controls & Indicators
  UP (1) Pushbutton, used to raise shade
  SET (1) Pushbutton, used to enter setup mode
  DN (1) Pushbutton, used to lower shade
  SET (1) Red LED, indicates the device setup status and error messages
  NET (1) Amber LED, indicates communication status of the Cresnet network
  PWR (1) Green LED, indicates power and status
Enclosure
  Plastic, White
Environmental
  Temperature 32° to 104°F (0° to 40°C)
  Humidity 0% to 90% RH (non-condensing)
Dimensions
  Height 0.68 in (18 mm)
  Width 2.58 in (66 mm)


facebook.png twitter.png linkedin.png youtube.png
Prices and specifications subject to change without notice.