Call Now: 1-800-284-2288 |
(discontinued) 10-Shade Power Supply and Cresnet Hub |
|
|
|
|
This item is discontinued. Recommended replacement CSA-PWS10S-HUB-ENET
The CSA-PWS10S-HUB power supply provides support for up to 10 Crestron® Shades and features a built-in, 5-segment hub with network diagnostics capabilities. Local controls and indicators allow for easy testing of shades without connecting to a control system. The CSA-PWS10S-HUB is convection cooled for silent operation and can be surface mounted. It is also available pre-assembled in a CAEN-1X1 enclosure, model CSA-PWS10S-HUB-CAEN-1X1, which can be surface mounted or recessed in a wall.
Available Configurations Include:
CSA-PWS10S-HUB-CAEN-1X1 10-Shade Power Supply and Cresnet® Hub w/CAEN-1X1 Enclosure
CSA-PWS10S-HUB features include:
- Support for 10 Crestron® Shades
- Built-in 5-segment Cresnet® hub
- Individual per-motor fuse protection
- Local master raise/lower controls
- Clear diagnostic LED indicators
- Convection cooled for silent operation
- Available pre-assembled in CAEN-1X1 enclosure
| Load Rating | ||
| Total Shades Supported | Provides power for up to (10) Crestron® Shades, each homerun to the power supply | |
| Output | 24VDC 50W/ Output 350W Total Continuous Load 425W 2 minutes ON, 2 minutes OFF Discontinuous Shade Load |
|
| Load Protection | (10) Self resetting thermal fuses and (10) replaceable 4A time lag fuses, (1) of each per output | |
| Power Requirements | ||
| Line Power | 120-240VAC, 50/60Hz, 5A Max | |
| Connections | ||
| NET HOST IN, OUT | (2) 4-pin 5 mm detachable terminal blocks; Cresnet slave ports, paralleled; Connect to Cresnet control network, power not supplied to these connections; Cresnet power output ports with data pass-through | |
| A-E, 1-10 | (10) 4-pin 5 mm detachable terminal blocks comprising (2) Cresnet ports per each of (5) hub segments | |
| USB | (1) USB Type B female, USB computer console port | |
| Line Power (CSA-PWS10S-HUB) | (1) Attached input power cable (~10 in long, 254 mm) with inline IEC 60320 C14 main power inlet; Mates with removable power cord (included) | |
| Line Power (CSA-PWS10S-HUB-CAEN-1X1) | (1) Attached input power cable (~10 in long, 254 mm) with inline IEC 60320 C14 main power inlet; Connects to AC power source using grounded pigtail cable and terminal block (both included) | |
| LED Indicators | ||
| PWR 1-10 | (10) Green LEDs, indicate 24V present at each corresponding output | |
| NET A-E | (5) Amber LEDs, indicate Cresnet activity on each corresponding hub segment | |
| NET HOST | (1) Amber LED, indicates Cresnet activity with control system | |
| MSG | (1) Red LED, indicates error messages and test mode | |
| Enclosure | ||
| MASTER UP | (1) Pushbutton, press and hold to raise all connected shades | |
| MASTER DOWN | (1) Pushbutton, press and hold to lower all connected shades | |
| TEST | (1) Pushbutton, initiates diagnostic test | |
| RESET | (1) Recessed pushbutton, forces hardware reset | |
| Enclosure | ||
| CSA-PWS10S-HUB | Metal, grey, surface mount (indoor use only) | |
| CSA-PWS10S-HUB-CAEN-1X1 | Includes CAEN-1X1, 16 Gauge galvanized steel enclosure with vented grey steel cover, surface mount or recessed in a wall (indoor use only) | |
| Environmental | ||
| Temperature | 32° to 104°F (0° to 40°C) | |
| Humidity | 10% to 90% RH (non-condensing) | |
| Dimensions | ||
| CSA-PWS10S-HUB | ||
| Height | 7.60 in (194 mm) | |
| Width | 12.97 in (330 mm) | |
| Depth | 2.66 in (68 mm) | |
| CSA-PWS10S-HUB-CAEN-1X1 | ||
| Height | 16.57 in (421 mm) | |
| Width | 16.10 in (409 mm) | |
| Depth | 4.44 in (113 mm) | |
| Weight | ||
| CSA-PWS10S-HUB | 5.6 lb (2.54 kg) | |
| CSA-PWS10S-HUB-CAEN-1X1 | 15 lb (6.8 kg) | |
| Standards & Certifications | ||
| UL Listed | ||
| csa-pws10s-hub.pdf | Datasheet |
Call Now: 1-800-284-2288 |
|||||
Email Us: sales@avsupply |
|||||
|
© 1996 - 2024 | All Rights Reserved
Audio Video Supply Inc.
4542 Ruffner St. Suite 220
San Diego, CA 92111
Prices and specifications subject to change without notice.