(discontinued)225 Watt Power Supply for Crestron Shades
|
|
By: Crestron
The World's Leader for Advanced Home, Campus & Building Control Automation Solutions
|
This item is discontinued. Recommended replacement CSA-PWS10S-HUB-ENET
The CSA-PWS225 is a 225 Watt power supply designed for use with Crestron shade motors. Power is supplied from 3 segments, each protected by a self resetting thermal fuse and a slow-blow cartridge fuse. By supplying 75 Watts per segment, the CSA-PWS225 is capable of powering up to 6 CSM-QMT50 shade motors.
Load Rating |
|
Per Segment |
75 Watts @ 24 Volts DC |
|
Total Load Rating |
225 Watts (75 W x 3 segments) @ 24 Volts DC |
|
Load Protection |
Self resetting thermal fuse and a replaceable 4A slow-blow fuse per segment |
Power Requirements |
|
Line Power |
100-120 Volts AC, 50/60 Hz |
Connections |
|
SEGMENT A-C |
(6) 4-pin detachable terminal blocks comprising (2) paralleled Cresnet ports per each of (3) output segments;
24 Volt DC power outputs |
|
CRESNET |
(2) 4-pin detachable terminal blocks; Cresnet slave ports, paralleled; Connect to Cresnet control network, power not supplied to these connections
Cresnet power output ports with data pass-through |
LED Indicators |
|
PWR |
(green) indicates power supply system is enabled; Off when no power from main supply |
|
Y |
(red) indicates data being transmitted; Off when data line low |
|
Z |
(red) indicates data being transmitted: Off when data line low/no data on cresnet |
|
A-C |
(green) indicates 24V DC power presetn at each segment output; Off when fuse blown |
Enclosure |
|
Wall mount, steel (inside use only) |
Environmental |
|
Temperature |
32° to 104°F (0° to 40°C) |
|
Humidity |
10% to 90% RH (non-condensing) |
Dimensions |
|
Height |
9.80 in (249 mm) |
|
Width |
10.91 in (277 mm) |
|
Depth |
5.47 in (139 mm) |
© 1996 - 2024 | All Rights Reserved
Audio Video Supply Inc.
4542 Ruffner St. Suite 220
San Diego, CA 92111
Prices and specifications subject to change without notice.