By: Crestron
The World's Leader for Advanced Home, Campus & Building Control Automation Solutions
Contact us for lowest price (800) 284-2288, (858) 565-1101,, or fax (858) 300-4193
DIN Rail Motor Control, 2 feeds, 2 channels

The DIN-2MC2 is a 2-channel motor control module designed to provide control of bidirectional motors for drapes, shades, projection screens, lifts, skylights, and gates. Each channel supports up/down or open/close control of a conventional three-wire bidirectional type motor up to 1/2 HP at voltages up to 240 Volts. Built-in timing and interlock logic make it easy to program the DIN-2MC2 for failsafe operation.

DIN-2MC2 features include:

  • Dual-channel bidirectional motor control
  • Supports 120 to 240 Volt 50/60 Hz
  • Override input
  • Cresnet® communications
  • Setup via front panel or software
  • Programmable functionality via DIN-AP2
  • 6M wide DIN rail mounting
Load Ratings
  Motor Control Channels 2
  Per Channel 0.5 HP @ 240 Volts AC, 50/60 Hz
  Module Total 1 HP @ 240 Volts AC, 50/60 Hz
  Load Types 3-Wire bidirectional motors
  1 – 2 (2) sets of (3) captive screw terminals;
3-wire bidirectional motor control relays;
Maximum Wire Size: 12 AWG (2.5 mm²)
  NET (2) 4-pin 3.5mm detachable terminal blocks, paralleled;
Cresnet slave port
  OVERRIDE (2) 2-pin 3.5mm detachable terminal blocks, paralleled;
Sensing input for external low-voltage contact closure;
Activates override mode when a closure is present;
Minimum Closure Rating: 10mA (per module) at 24 Volts
Controls & Indicators
  OPEN & CLOSE 1 – 2 (4) Red LEDs and (4) miniature pushbuttons for status indication and local control of each channel
  NET ID (2) 7-Segment green LED digits and (2) miniature pushbuttons for setting Cresnet ID
  SETUP (1) Red LED and (1) recessed miniature pushbutton for enabling setup mode and touch-settable ID
  OVR (1) Red LED and (1) miniature pushbutton for enabling override mode and saving override presets
  PWR (1) Green LED, illuminates when DC power is applied to the NET port
  NET (1) Yellow LED, indicates communication with the control processor
  RESET (1) Recessed miniature pushbutton, resets internal processor
  Light gray polycarbonate housing with polycarbonate label overlay, UL94 V-0 rated, 35mm DIN EN 60715 rail mount, DIN 43880 form factor for enclosures with 45mm front panel cutout, occupies 6 DIN module spaces (108mm)
Power Requirements
  Cresnet Power Usage 3 Watts (1.13 Amps @ 24 Volts DC)
  Temperature 32° to 104°F (0° to 40°C)
  Humidity 10% to 90% RH (non-condensing)
  Heat Dissipation 10 BTU/hr
  Height 3.71 in (94.2 mm)
  Width 4.18 in (106.0 mm)
  Depth 2.35 in (59.5 mm)
  7.4 oz (210 g)

facebook.png twitter.png linkedin.png youtube.png
Prices and specifications subject to change without notice.