HQV Digital Cinema Alternative Content Scaler-Switcher

Harnessing the power of the Reon™ video processor from IDT, running state of the art HQV algorithms with expertly designed hardware and firmware from Calibre, HQView400DC is a highly flexible digital cinema alternative content scaler switcher which gives stunning image quality from consumer and professional AV sources, providing flexible connectivity and a compact 1U form factor.

HQVIEW400DC features include:

• Digital Cinema alternative content image processor in a compact 1U format
• Use as a routing switcher and universal interface
• Improve video image quality with better detail and clarity
• Superior de-interlacing reduces image flicker and artefacts
• Optimized for integration with digital cinema projectors
• Lower cost alternative to Calibre’s PVProHD-DC super-premium alternative
  content processor
• HDMI, DVI, VGA Analog, Component YPbPr,RGsB/RGBS, Composite, S-Video &
  HD-SDI inputs with signal compatibility up to 1080p & WUXGA
• HDMI/DVI & VGA Analog outputs
• Motion adaptive per pixel video de-interlacing, HD & SD
• Multi-directional diagonal de-interlace filter
• Automatic 3:2 & 2:2 pull-down detection with automatic film, video and video over
  film detection
• Chroma and Luma transient improvement
• Edge anti-aliasing
• 4-field full resolution SD & HD processing
• 4D Motion, Noise Adaptive HQV noise reduction for spatial and temporal noise
• Codec noise reduction for mosquito and block compression noise
• PIP (Picture in Picture), POP (Picture on Picture), PAP (Picture alongside Picture)
• Direct input selection keys allow input selection without using menu system
• Flexible color calibration controls
• Gamma controls
• 10-bit signal inputs, 12-bit accurate internal processing
• Selectable processing versus latency: best picture and low latency modes
• Latency as low as 0.25-frame progressive inputs, 1.25-frames interlaced inputs
• USB port for in-field firmware updates
• Programmable customer logo on menu
• TCP/IP remote control and Web Server
• Easy to navigate self-explanatory OSD menus
• Compatible with alternative content DVI or HDMI input on digital cinema
  projectors

Inputs

2x Composite Video CVBS (NTSC, PAL & SECAM),
1x via BNC jack and 1x via Cinch/RCA
1x YC/S-Video via 4 pin mini DIN
1x Component analog video YPbPr(S) or RGsB/RGBS via 3 or 4 x BNC jack
1x HDMI1.3 with HDCP, 8/10/12 bit video compatible, 10-bit internal processing depth. Audio strip-off of SPDIF compatible formats
1x DVI with HDCP
1x VGA Analog via 15HDD
1 x HD-SDI, accepts SD and HD SDI signals via BNC

Supported video formats
HD 720p, 1080i, 1080psf (psf digital only), 1080p23.97/24/25/30, 1080p30, 1080p50, 1080p59.94, 1080p60
ED 480p, 576p (not via SDI)
SD 625i (576i), 525i (480i)
Common VESA graphics formats from 640×480 to 1920×1200 (with reduced blanking for 1920×1200 and 1600×1200 modes)

Multi standard support for CVBS & YC in PAL, NTSC, SECAM formats with selectable 3D comb for composite

Outputs

1x DVI/HDMI with HDCP (HDMI1.3 with deep color 8/10/12 bit support, via DVI connector)
1x VGA Analog via 15HDD
1x S/PDIF digital audio via RCA
NB: VGA Analog output is disabled with HDCP-encrypted input

Supported Output formats:
Primary output mode is 1920×1080 optimized for alternative content input of digital cinema projectors.
Also supports common VESA formats from 640×480 to 1920×1200, and HD formats at 720p, 1080p.
Selectable I/O lock mode, or frame rate conversion mode
Selectable aspect ratio conversion

User Controls
Keypad for direct input selection, control of common adjustments and OSD
Remote control via RS232, TCP/IP API and Web Server
USB port for uploading software updates and new features

Power Requirements
100-264VAC, 30W typical

Warranty
1-years return to base warranty covers parts and labor, shipping
excluded.