rcm-28.jpg View Larger Image (in new window)

Electro Voice : RCM-28

By: Electro Voice
Pro-audio Products
Contact us for lowest price (800) 284-2288, (858) 565-1101,, or fax (858) 300-4193
OMNEO Network and DSP Module for Tour Grade Amplifiers

The Electro Voice RCM-28 Remote Control Module is a two-channel digital controller module for live sound reinforcement, PA and fixed installation applications. The module can be used in Electro-Voice Tour Grade amplifier models. Installing the RCM-28 turns a conventional amp into a remote amplifier, which, at any time, provides complete overview of the overall system status and control of all system parameters. RCM-28 modules allow the integration of amplifiers into an OMNEO network with up to 100 devices in a single subnet without additional hardware. OMNEO is a media networking architecture for professional applications. Using standard IP Ethernets, media products that integrate OMNEO can be assembled into networks of 2 to 10,000 cooperating devices that exchange studio-quality synchronized multichannel audio and share common control systems. This offers the possibility to control and monitor an entire sound system from one or more PCs using the IRIS-Net - Intelligent Remote & Integrated Supervision - software package. In addition to digital signal processing functions, the RCM-28 also offers a digital audio input (AES/EBU), OMNEO network audio inputs and outputs, and freely programmable control inputs and control outputs.

RCM-28 features include:

  • OMNEO Network Interface
  • Extend Tour Grade performance with powerful DSP functionality
  • Advanced FIR-Drive loudspeaker optimization
  • High precision load impedance supervision
  • Two GPI and two GPO ports
  • One-button system test for fast, complete check of connected cables and components
  • Pilot tone detection for cable supervision
  • Six recallable DSP/configuration presets
  • Compatibility with any Dante network

A/D Conversion

24 Bit linear, sigma-delta, 128x oversampling

Analog Inputs

2 audio inputs on internal slot connector, pre-/post fader selectable

CAN Bus Interface


Control Protocol


D/A Conversion

24 Bit linear, sigma-delta, 128x oversampling

Data Format

24 Bit linear A/D and D/A conversion, 48 Bit processing

Digital Inputs

Omneo Network and AES3 (AES/EBU) format, XLR in/ thru connectors



GPIO Control Ports

1 x 6-pole Euro block 2 control inputs (Uin max. 5 V) 2 control outputs (2x 100 mA) 2 reference outputs (+5 V, 200 mA; GND)

Internal Processing

Dual core DSP, 500 MIPS

Network Control (IRIS-Net)


Sample Rate

48 kHz

Sample Rate Conversion (SRC)

32–192 kHz, internal sample rate- converter

Signal-to-Noise Ratio (A-weighted)

weighted) ADC: 120 dB typical DAC: 120 dB typical AES3: 128 dB typical Analog In to Analog Out: 116 dB typical dB


< 0.002 %


2RU 80.4 mm (3.17")


84.7 mm (3.33")


230.8 mm (9.09")

Weight Net

14.11 oz (400 g)

facebook.png twitter.png googleplus.png linkedin.png youtube.png pinterest.png
Prices and specifications subject to change without notice.